Tap Geometry Sorting on boA5120-230cm/cc (GSPRINT4521) Cameras#
Basler boost V boA5120-230cm/cc cameras are equipped with a Gpixel GSPRINT4521 sensor.
To reduce the sensor readout time and therefore generate a higher maximum frame rate, the GSPRINT4521 sensor is read out in multiple taps.
This is performed according to predefined geometry parameters, which are defined by the GenICam standard. In this standard, the number of divided zones in X and Y direction are specified.
The GSPRINT4521 sensor is divided into two zones in the Y direction, which are both read out in the vertical direction.
The GenICam standard defines this tap geometry as 1X-2YE.