User Sets#

// Load the High Gain user set
camera.UserSetSelector.SetValue(UserSetSelector_HighGain);
camera.UserSetLoad.Execute();
// Load the User Set 1 user set
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetLoad.Execute();
// Adjust some camera settings
camera.Width.SetValue(600);
camera.Height.SetValue(400);
camera.ExposureTime.SetValue(3500.0);
// Save the settings in User Set 1
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetSave.Execute();
// Designate User Set 1 as the startup set
camera.UserSetDefaultSelector.SetValue(UserSetDefaultSelector_UserSet1);

INodeMap& nodemap = camera.GetNodeMap();
// Load the High Gain user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("HighGain");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Load the User Set 1 user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Adjust some camera settings
CIntegerParameter(nodemap, "Width").SetValue(600);
CIntegerParameter(nodemap, "Height").SetValue(400);
CFloatParameter(nodemap, "ExposureTime").SetValue(3500.0);
// Save the settings in User Set 1
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetSave").Execute();
// Designate User Set 1 as the startup set
CEnumParameter(nodemap, "UserSetDefaultSelector").SetValue("UserSet1");

// Load the High Gain user set
camera.UserSetSelector.SetValue(UserSetSelector_HighGain);
camera.UserSetLoad.Execute();
// Load the User Set 1 user set
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetLoad.Execute();
// Adjust some camera settings
camera.Width.SetValue(600);
camera.Height.SetValue(400);
camera.ExposureTime.SetValue(3500.0);
// Save the settings in User Set 1
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetSave.Execute();
// Designate User Set 1 as the startup set
camera.UserSetDefault.SetValue(UserSetDefault_UserSet1);

INodeMap& nodemap = camera.GetNodeMap();
// Load the High Gain user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("HighGain");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Load the User Set 1 user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Adjust some camera settings
CIntegerParameter(nodemap, "Width").SetValue(600);
CIntegerParameter(nodemap, "Height").SetValue(400);
CFloatParameter(nodemap, "ExposureTime").SetValue(3500.0);
// Save the settings in User Set 1
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetSave").Execute();
// Designate User Set 1 as the startup set
CEnumParameter(nodemap, "UserSetDefault").SetValue("UserSet1");