Circuit Diagrams (Basler dart M GigE Interface Boards)#

This topic provides sample circuit diagrams for connecting your Basler dart M GigE Interface Board to a dart M GigE camera module.

光电耦合输入线路#

The following diagram shows a typical circuit using the opto-coupled input line (Line 1) of a Basler dart M GigE Interface Board. As an example, a TTL or CMOS logic gate is used in the external circuit.

带有典型外部电路的光电耦合输入线路电路图

GPIO 输入线路#

The following diagram shows a typical circuit when a GPIO line is set to operate as an input. As an example, Line 3 is connected, and a TTL or CMOS logic gate is used in the external circuit.

GPIO Input Line Circuit Diagram with a Typical External Circuit

下图展示了使用 GPIO 线路的外部电路的另一个示例。

GPIO Input Line Circuit Diagram with a Different External Circuit

The following diagram shows the same setup without using an external pull-up resistor:

GPIO Input Line Circuit Diagram without External Pull-Up

GPO / GPIO as Output Line#

The following diagram shows a typical circuit when a GPIO line is set to operate as an output. As an example, Line 3 is connected. This circuit only works with devices that accept NPN communication.

GPIO Output Line Circuit Diagram with a Typical Voltage Output Circuit

The following diagram shows the same setup without using an external pull-up resistor:

GPIO Output Line Circuit Diagram without External Pull-Up