Basler Vision Connector Messaging: Application Feedback#

Message Codes#

The following message codes are sent as responses.

Info Message Codes#

Value range for info messages: 0x00000000 … 0x00FFFFFF

Message Codes	含义
`0x00000000`	Request was completed successfully.
`0x00000001`	Application is online.
`0x00000002`	Application is offline.

Warning Message Codes#

Value range for warning messages: 0x01000000 … 0x01FFFFFF

Message Codes	含义
`0x01000000`	A request was only partially successful.

Debug Message Codes#

Value range for debug messages: 0x02000000 … 0x02FFFFFF

Error Message Codes#

Value range for error messages: 0x03000000 … 0x03FFFFFF

Message Codes	含义
`0x03000000`	Error while parsing a request
`0x03000001`	Error while handling a request
`0x03000002`	An opened device was removed

Application Logging#

The application log is published in the logging topic. In this log, you find any general application log information that is no direct response to any given command, such as application unhandled errors, camera error messages and camera connectivity issues.

There are different structures to receive logging messages for ZMQ and for MQTT:

In ZMQ, subscribe to the logging topic on the PUB/SUB port to receive application feedback.
In MQTT, subscribe to the {mqttRoot}/logging topic to receive application feedback.

ZMQ Response on PUB/SUB Channel#

Frame	Field	描述	键入
1	topic	Logging topic	Binary string (UTF-8): logging
2	有效负载	JSON response object	Binary string (UTF-8)

MQTT Reponse#

In MQTT, the JSON messages are written directly into the payload of the MQTT message. No specific envelop is required.

JSON Response Object#

Field	Optional	键入	描述
Timestamp	是	String	Application host date and time in ISO8601 format, i.e. when the message was created.
Code	是	Integer (32-bit unsigned)	Message code following Message Codes
Level	无	String	Log level - Debug, Info, Warning, Error
消息	无	String	Response message

{
    "Timestamp":"2014-01-09T13:35:34.000000000+0100",
    "Code": 50331650,
    "Level":"Error",
    "Message":"Lost connection with myCam1"
}