PLTransportLayer Class#

List of all parameter names available for pylon device transport layers

Inheritance Hierarchy#

System.Object
  Basler.Pylon.PLTransportLayer

Properties#

	Name	Description
	AppletRevision	Indicates the revision number of the applet. Report this value when contacting the Basler support. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	AppletVersion	Returns the applet version. Please report the version if you are requesting support. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	AreaTriggerMode	Sets the trigger mode of the area trigger signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	AutomaticFormatControl	Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	AutomaticROIControl	Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	AutomaticTapGeometryControl	Activates or deactivates the automatic control of the Tap Geometry in the Device. If this feature is active, the frame grabber Tap Geometry is automatically updated to the camera one. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	BitAlignment	Sets the alignment of the bits in the output format. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CameraCorrectedErrorCount	Counts the number of single-byte error corrections in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CameraUncorrectedErrorCount	Counts the number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CommandDuplicationEnable	Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems. Applies to: GigE and blaze Visibility: Guru The feature documentation may provide more information.
	CompatibilityStatusAutomaticRoiControl	Automatic ROI control status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CompatibilityStatusPixelFormat	Pixelformat status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CompatibilityStatusTapGeometry	Tap geometry status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ConnectionGuardEnable	Enables the automatic start of the PylonGigEConnectionGuard. Applies to: GigE Visibility: Guru The feature documentation may provide more information.
	CorrectedErrorCount	Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CustomBitShiftRight	User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CustomSignalEvent0Polarity	Select the signal polarity for the custom signal event 0 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CustomSignalEvent0Source	Select the signal source for the custom signal event 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CustomSignalEvent1Polarity	Select the signal polarity for the custom signal event 1 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CustomSignalEvent1Source	Select the signal source for the custom signal event 1 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpCameraFrameCorruptCount	Counts the corrupted frames during acquisition. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpCameraFrameLostCount	Counts the frames that were lost during acquisition and aren't sent into the applet image pipeline. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpCameraMarkerErrorCount	Counts how often the sequence of the CXP stream marker and the header or the line markers were incorrect. The parameter is 13 bit wide, where the bits [11:0] represent the actual counter value and the bit [12] stands for the counter overflow. When the overflow bit is set, the counter value shall be treated as don't care. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpCameraUnexpectedStartupDataStatus	Detects the error situation in which the first data value after the operator reset was unexpected, i.e. no image header has been received. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckIncompleteCount	Counts situations in which an incorrectly formatted acknowledgment for a control packet was received. Incorrectly formatted means that e.g. the end of packet indicator is missing etc. Range 0 to 8191 (13 bit). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckIncompleteCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckLostCount	Counts situations in which a control packet was sent but no acknowledgment packet was received for it yet and the timeout of 200 ms is reached. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckLostCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckPacketCrcError	Returns information whether there were CRC errors in received control acknowledgement packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlAckPacketCrcErrorSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlTagErrorCount	Counts situations in which an acknowledgment for a control packet was received with a tag that doesn't match the expected tag sent in the corresponding request control packet. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpControlTagErrorCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrected	Counts errors received in packet headers and trailers that were corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedControlAck	Returns the information whether errors were corrected in received stream acknowledge packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedControlAckSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedHeartbeat	Returns the information whether errors were corrected in received heartbeat packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedHeartbeatSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedLinkTest	Returns the information whether errors were corrected in received link test packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedLinkTestSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedStream	Returns the information whether errors were corrected in received stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedStreamSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedTrigger	Returns the information whether errors were corrected in received trigger packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedTriggerAck	returns the information whether errors were corrected in received trigger acknowledge packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedTriggerAckSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorCorrectedTriggerSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrected	Counts errors received in packet headers and trailers that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedControlAck	Returns information whether there were errors in received control acknowledgement packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedControlAckSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedHeartbeat	Returns information whether there were errors in received heartbeat packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedHeartbeatSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedLinkTest	Returns information whether there were errors in received link test packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedLinkTestSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedStream	Returns the information whether there were errors in received stream packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedStreamSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedTrigger	Returns the information whether there were errors in received trigger packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedTriggerAck	Returns the information whether there were errors in received trigger acknowledgement packets that haven't been corrected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedTriggerAckSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpErrorUncorrectedTriggerSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpHeartbeatIncompleteCount	Counts the received heartbeat packets that are incomplete, e.g. they miss the end of the packet indicator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpHeartbeatIncompleteCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpHeartbeatMaxPeriodViolationCount	Counts the situations in which heartbeat packets sent by the camera exceeded the timeout (100ms). Bits [11:0] count the amount of violations. Bit [12] is set when a counter overflow occurs. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpHeartbeatMaxPeriodViolationCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpImageTagErrorCount	Returns the number of image tag errors (jumps) in the CXP headers. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpInputMappedToFWPortPort	Returns the firmware CXP channel, which is currently monitored by the module. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpInputMappedToFWPortPortSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkConfiguration	Sets the link configuration for the communication between the receiver and transmitter device. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	CxpLinkTrigger0Source	Sets the output source for CXP LinkTrigger0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger0SourceEdge	Selects the signal edge of the output signal on CXPLinkTrigger0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger1Source	Sets the output source for CXP LinkTrigger1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger1SourceEdge	Selects the signal edge of the output signal on CXP LinkTrigger1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger2Source	Sets the output source for CXP LinkTrigger2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger2SourceEdge	Selects the signal edge of the output signal on CXP LinkTrigger2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger3Source	Sets the output source CXP LinkTrigger3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpLinkTrigger3SourceEdge	Selects the signal edge of the output signal on CXP LinkTrigger3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpOvertriggerRequestPulseCount	Counts the trigger requests that were skipped, because the transmitter was still busy by sending the previous trigger packet. Bit 12 indicates an overflow. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpOvertriggerRequestPulseCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamIDErrorCount	Counts how often the received stream ID value in the stream packets mismatches the stream ID value specified in the image header. The parameter is 13 bit wide, where the bits [11:0] represent the actual counter value and the bit [12] stands for the counter overflow. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketCount	Counts the amount of received stream packets. Bits [29:0] count the number of packets. Bit [30] is set when a counter overflow occurs. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketCrcError	Returns information whether there were CRC errors in received stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketCrcErrorSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketLengthError	Returns information whether a length error in the stream packets was detected. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpStreamPacketLengthErrorSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpTriggerAckMissingCount	Counts the situations in which a trigger packet was sent, but no acknowledgment packet was received for it yet, which then led to a timeout. Bits [11:0] count the amount of violations. Bit [12] is set when a counter overflow occurs. Range 0 to 8191 (13 bit). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpTriggerAckMissingCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedEventReceived	Returns information whether an event packet was received while using a CXP standard less than 2.0. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedEventReceivedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioAckReceived	Returns information whether a GPIO acknowledgment was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioAckReceivedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioReceived	Returns information whether a GPIO packet was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioReceivedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioRequestReceived	Returns information whether a GPIO request from VisualApplets was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedGpioRequestReceivedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedHeartbeatReceived	Returns information whether a heartbeat packet was received while using a CXP standard less than 2.0. Range: 0 (NO) to 1 (YES). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	CxpUnsupportedHeartbeatReceivedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	DeviceAccessStatus	Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information.
	DeviceDisplayName	User-friendly name of the device. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information.
	DeviceEndianessMechanism	Sets the endianness handling mode. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	DeviceID	Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information.
	DeviceManufacturerInfo	Additional information about the manufacturer of the device. Applies to: blaze Visibility: Beginner The feature documentation may provide more information.
	DeviceModelName	Name of the device model. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Beginner The feature documentation may provide more information.
	DeviceSerialNumber	Serial number of the remote device. This value only changes when the Device Update List command is executed. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	DeviceType	Returns the transport layer of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	DeviceVendorName	Name of the device vendor. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Beginner The feature documentation may provide more information.
	DigitalInput	Read the current state of all digital inputs. You can read the current state of these inputs using this parameter. LSB Bit 0 of the read value represents input 0, bit 1 represents input 1 and so on. Bits 0 to 7 use GPI 0 to 7. Front GPI 0 to 3 are represented by bits 8 to 11. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventAcquisitionTrigger	AcquisitionTrigger Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventAcquisitionTriggerSoftCounter	Software counter for event 'AcquisitionTrigger' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventAcquisitionTriggerTimestamp	Timestamp of event 'AcquisitionTrigger' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatus	CameraStreamStatus Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusCorrupted	Event loss for type Corrupted occurred. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusEventType	Event type (Corrupted or Lost) Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusFrameId	Frame ID in which the event occurred. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusLost	Event loss for type Lost occurred. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusLostAmount	Amount of lost Lost events. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusSoftCounter	Software counter for event 'CameraStreamStatus' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusStreamId	Stream ID in which the event occurred. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventCameraStreamStatusTimestamp	Timestamp of event 'CameraStreamStatus' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventDeviceLost	Returns the unique Identifier of the Device Lost event. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information.
	EventDeviceLostSoftCounter	Software counter for event 'DeviceLost' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferEnd	FrameTransferEnd Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferEndSoftCounter	Software counter for event 'FrameTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferEndTimestamp	Timestamp of event 'FrameTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferStart	FrameTransferStart Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferStartSoftCounter	Software counter for event 'FrameTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTransferStartTimestamp	Timestamp of event 'FrameTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTriggerMissed	FrameTriggerMissed Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTriggerMissedSoftCounter	Software counter for event 'FrameTriggerMissed' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventFrameTriggerMissedTimestamp	Timestamp of event 'FrameTriggerMissed' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferEnd	LineTransferEnd Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferEndSoftCounter	Software counter for event 'LineTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferEndTimestamp	Timestamp of event 'LineTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferStart	LineTransferStart Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferStartSoftCounter	Software counter for event 'LineTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventLineTransferStartTimestamp	Timestamp of event 'LineTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventNotification	Sets whether the host application is notified of the selected event. Applies to: CoaXPress and blaze Visibility: Expert Selected by: EventSelector The feature documentation may provide more information.
	EventOverflow	Overflow Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowFrameId	Camera frame-ID for area scan applets or grabber frame-ID for line scan applets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowIsComplete	Frame is complete. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowIsEndOfSequence	Marks the end of a sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowIsLost	Frame is lost. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowIsTruncated	Frame is truncated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowSoftCounter	Software counter for event 'Overflow' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventOverflowTimestamp	Timestamp of event 'Overflow' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventSelector	Sets which event to signal to the host application. Applies to: CoaXPress and blaze Visibility: Expert Selecting Parameters: EventNotification The feature documentation may provide more information.
	EventTriggerExceededPeriodLimits	TriggerExceededPeriodLimits Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerExceededPeriodLimitsSoftCounter	Software counter for event 'TriggerExceededPeriodLimits' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerExceededPeriodLimitsTimestamp	Timestamp of event 'TriggerExceededPeriodLimits' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOff	TriggerQueueFilllevelThresholdOff Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOffSoftCounter	Software counter for event 'TriggerQueueFilllevelThresholdOff' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOffTimestamp	Timestamp of event 'TriggerQueueFilllevelThresholdOff' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOn	TriggerQueueFilllevelThresholdOn Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOnSoftCounter	Software counter for event 'TriggerQueueFilllevelThresholdOn' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	EventTriggerQueueFilllevelThresholdOnTimestamp	Timestamp of event 'TriggerQueueFilllevelThresholdOn' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ExSyncOn	Enables or disables the ExSync output to the camera. Make sure that the camera is expecting this signal and interprets it in the expected way. The polarity of this signal is relevant for proper functionality. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ExSyncPolarity	Sets the polarity of the ExSync output signal. Adjusts the polarity of the Exsync signal genarator to the polarity accepted by the connected camera. Use LowActive, if the camera starts exposure on a falling edge, otherwise use HighActive. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ExtensionGPOType	Sets the configuration type of the extension GPIO interface. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FillLevel	Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FlashOn	Switches the flash signal on or off. The pulse width of the flash signal is equal to one line period. The flash gives a signal between the first and second Exsync rising edge. A single trigger is sent for a full frame. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FlashPolarity	Sets the generated flash signal polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	Format	Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FrontGPI	Current input signal levels of all front GPI inputs (bit mask). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FrontGPIPullControl	Sets the pull control of the front GPI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FrontGPISignalType	Sets the signal type of the front GPI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	FrontGPOInversion	Enables or disables the inversion of the front GPO. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	GentlInfoIgnorefgformat	Ignore the FG output format and manage it internally in the GenTL producer Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	GentlInfoVersion	Version of the GenTL description Interface in the applet. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	GevDeviceGateway	Current gateway IP address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	GevDeviceIPAddress	Current IP address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	GevDeviceMACAddress	48-bit MAC address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	GevDeviceSubnetMask	Current subnet mask of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information.
	GPI	The current input signal levels of all GPI inputs (bitmask). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	HeartbeatTimeout	Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa. Applies to: GigE Visibility: Beginner The feature documentation may provide more information.
	Height	Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageSelect	Defines which image of an image sequence is grabbed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageSelectPeriod	Selects the length of an image sequence. Only one single image of the sequence is grabbed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerAsyncHeight	The total image height in lines in case of multi buffer mode. Only relevant if a Multibuffer image trigger mode is used. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerDebouncing	The debouncing time of the input image trigger. Signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time are filtered out. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerGateDelay	The delay of the image gate in lines with respect to ExSync. The image trigger is delayed by a defined number of lines. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerInputPolarity	Sets the polarity of the image trigger input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerInputSource	Sets the image trigger input signal source, which is used to trigger the image acquisition. This is only relevant if the Image Trigger Mode is set to Extern/Gate. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerIsBusy	With this read-only value it is possible to check whether the image trigger is busy, i.e. whether an image is currently being acquired. During this time an additional image trigger is ignored. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerMode	Sets the trigger mode for the image generation. An image trigger can define the start and length of an image. FreeRun: All incoming lines received from the camera are accepted. Image size is defined by the ROI. ASync_External_Trigger: At the rising edge of an accepted image trigger input signal, a new frame is started and incoming lines are appended to an image up to ROI-Height. A new rising edge of the image trigger is only accepted after the current frame is finished. Gated_External_Trigger: In gated mode, the input signal active state Sets the height of the resulting frame. ROI-Height is the maximum height. _Multibuffer modes can handle a certain number of lines for multiple frames of ROI size. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ImageTriggerOn	Enables or disables the image trigger module. The OFF state corresponds to FreeRun. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineDownscale	The downscale factor of the line trigger input signal. Specifies the number of external input trigger signals, which are needed to generate a single Exsync. This is only relevant if the TriggerMode is set to an external ASync_trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineDownscaleInit	The phase of the downscaling with respect to the image gate. Specifies the number of external input signals, which are needed to generate the first Exsync of a frame. Exsync is used to trigger lines. This is only relevant if the TriggerMode is set to ASync_Trigger_Gated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineExposure	The length of the ExSync signal pulse. This parameter specifies the pulse width of the Exsync signal, which can be used by many cameras as externally defined exposure time. With this parameter it is possible to adjust the exposure time during runtime via software, even while grabbing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LinePeriod	The length of the ExSync period. This parameter defines the line frequency when using the grabber controlled mode to send a trigger signal to the connected camera. The value of the line period needs to be greater than the line delay. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineTriggerDebouncing	Specifies the debouncing time of the input line trigger, events, IO forwards and analyzers. The signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time will be filtered out. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineTriggerDelay	The delay of the ExSync signal with respect to the trigger input signal. Specifies the delay of the generated ExSync signal, with respect to an external trigger input. The resulting ExSync2 signal is a delayed clone of the ExSync. Polarity, period, etc. are the same as for ExSync. The line delay needs to be less than the line period even for external trigger modes where the internal line period is not used. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineTriggerInPolarity	Sets the polarity of the external input trigger signal encoder source A and source B. When set to LowActive, the Exsync generator starts on a falling edge of the signal specified as frame trigger. Otherwise, the Exsync generation starts on a rising edge. This is only relevant if the TriggerMode is set to Extern_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineTriggerInSource	Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source A when using a shaft encoder. This is only relevant, if the TriggerMode is set to ASync_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LineTriggerMode	Sets the operation mode for the Exsync signal generation. The source for the external trigger input can be selected via the parameters SourceA and SourceB. Grabber_Controlled: Exsync is generated periodically by the internal signal generator. ASync_Trigger: Each external trigger signal from a peripheral device is used to generate an ExSync based on the defined exposure time. Grabber_Controlled_Gated: Exsync is generated periodically by the internal signal generator during the acquisition of a frame. Extern_Trigger_Gated: An external trigger signal from a peripheral device is used to generate the ExSync during the acquisition of a frame only. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LinkCommandRetryCount	Specifies maximum number of tries before failing the control channel commands. Applies to: blaze Visibility: Guru The feature documentation may provide more information.
	LinkCommandTimeout	Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error. Applies to: blaze Visibility: Beginner The feature documentation may provide more information.
	LutCustomFile	Filename with custom lookup table values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutEnable	Switch the LUT and processing functionality on or off. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutImplementationType	Type of LUT implementation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutInputPixelBitDepth	The pixel's bit depth at the lookup table input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutOutputPixelBitDepth	The pixel's bit depth at the lookup table output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutSaveFile	Save current LUT configuration. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutType	Enables the LUT to be loaded with custom values or uses the applet's processor. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValue	Field with LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueBlue	Field with blue LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueBlueSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueGreen	Field with green LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueGreenSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueRed	Field with red LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueRedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	LutValueSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	MaxRetryCountRead	Maximum number of retries for read operations after a read operation has timed out. Applies to: GigE Visibility: Guru The feature documentation may provide more information.
	MaxRetryCountWrite	Maximum number of retries for write operations after a write operation has timed out. Applies to: GigE Visibility: Guru The feature documentation may provide more information.
	MigrationModeEnable	Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only. Applies to: GigE and USB Visibility: Guru The feature documentation may provide more information.
	MissingCameraFrameResponse	Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	MissingCameraFrameResponseClear	Clears the Missing Camera Frame Response parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OffsetX	X-offset of the acquisition ROI, independent of the camera ROI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OffsetY	Y-offset of the acquisition ROI, independent of the camera ROI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OutputPackedFormats	Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	Overflow	Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OverflowEventSelect	An overflow event can be generated on each incomplete, lost or correct frame. With this enumeration, you can select which permutation of these three events is reported via overflow event. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OverflowOffThreshold	Overflow handling will be inactive once the buffer filllevel is below this value. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OverflowOnThreshold	Overflow handling will be active once the buffer filllevel is above this value. Frames will be interrupted. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	OverflowSyncOnThreshold	Overflow handling will be active once the buffer filllevel is above this value, after the currently active frame is completed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	PacketTagErrorCount	Number of packet errors. This parameter indicates that CXP stream packets are lost. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	PixelDepth	Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	PixelFormat	Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ProcessingGain	Gain correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ProcessingGamma	Gamma correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ProcessingInvert	Invert output. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ProcessingOffset	Offset correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ReadTimeout	Read access timeout value in milliseconds. Applies to: GigE Visibility: Beginner The feature documentation may provide more information.
	ScalingFactorBlue	The blue gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ScalingFactorGreen	The green gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ScalingFactorRed	The red gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SendSoftwareTrigger	Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SensorHeight	The sensor height in selected tap geometry. The value is ignored, if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SensorWidth	The sensor width in selected tap geometry. The value is ignored if, Vantage Point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SetSoftwareTrigger	Turns software trigger signal on or off. With this parameter a software gate can be produced in case of an externally gated image trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderCompensationCount	Reads or writes the current compensation count. Value 0 refers to no compensation. You can reset the compensator by writing 0 to the parameter. Is based on a 20-bit counter enabling a backward movement of up to 1048576 steps. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderCompensationEnable	Enables or disables the shaft encoder rollback compensation. This parameter is relevant in case of a shaft encoder AB configuration. If switched to ON, in case of shaft encoder backward movement, the operator counts how many shaft encoder steps the shaft encoder moves backwards. When the shaft encoder moves forwards again, this number of shaft encoder steps (now forward direction) is not transmitted as external trigger signals. Only after the transportation belt is back to the place where the backward movement started, the shaft encoder steps (forward direction) are transmitted as external trigger signals again. If switched to OFF, the operator simply doesn't transmit any trigger signals as long as the transportation belt moves backwards. As soon as the transport belt starts to move forwards again, the operator transmits the shaft encoder steps (forward direction) as trigger signals. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderInputSource	Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source B when using a shaft encoder. This is only relevant if the TriggerMode is set to ASync_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderLeading	Sets the leading signal / direction for the shaft encoder. A foreward movement is defined by a rising edge of signal A before signal B, if the parameter is set to Signal_AB. Source_A: Forward is defined by A before B. Source_B: Forward is defined by B before A. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderMode	Sets the shaft encoder mode. Filter_x1: Exsync is generated for a forward rotation of the shaft encoder in single resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA. Filter_x2: Exsync is generated for a forward rotation of the shaft encoder in double resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA and a rising edge of LineTrgInSourceB. Filter_x4: Exsync is generated for a forward rotation of the shaft encoder in quad resolution, i.e., a trigger pulse for a rising and a falling edge of LineTrgInSourceA and a rising and a falling edge of LineTrgInSourceB. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	ShaftEncoderOn	Enables or disbales the shaft encoder. Sets whether a single trigger input (off = A only) is used for the Exsync generation, or the signals A and B (on). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0CurrentPeriod	Returns the last measured period of the selected source and polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0MaxPeriod	Returns the maximum measured period of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0MinPeriod	Returns the minimum measured period of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0Polarity	Sets the signal analyzer 0 polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0PulseCount	Returns the number of rising edges e.g. pulses of the selected source and of the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer0Source	Sets the signal source analyzer module 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1CurrentPeriod	Returns the last measured period of the selected source and polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1MaxPeriod	Returns the maximum measured period of the selected source and the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1MinPeriod	Returns the minimum measured period of the selected source and the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1Polarity	Sets the signal analyzer module 0 polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1PulseCount	Returns the number of rising edges e.g. pulses of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzer1Source	Sets the signal source analyzer module 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzerClear	Clears all measurement results. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SignalAnalyzerPulseCountDifference	Use this read-only parameter to check the difference of the signal analyzer 0 and 1 pulse counter values (Analyzer 0 - Analyzer 1 value). This can be used to check for lost trigger signals, if analyzer 0 counts the ExSyc pulses and analyzer 1 counts the returned camera lines. In this case the difference is between 0 and 1 for single line cameras with no extra delay. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SoftwareTriggerIsBusy	Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SoftwareTriggerQueueFillLevel	Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	Statistic_Last_Error_Status	Last error status of a read or write operation. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	Statistic_Last_Error_Status_Text	Last error status of a read or write operation. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	Statistic_Read_Operations_Failed_Count	Number of failed read operations. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	Statistic_Read_Pipe_Reset_Count	Number of read pipe resets. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	Statistic_Write_Operations_Failed_Count	Number of failed write operations. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	Statistic_Write_Pipe_Reset_Count	Number of write pipe resets. Applies to: USB Visibility: Expert The feature documentation may provide more information.
	StatisticReadWriteTimeoutCount	Number of timeouts during read and write operations when waiting for a response from the device. Applies to: GigE and blaze Visibility: Guru The feature documentation may provide more information.
	StreamDisplayName	User-friendly name of the selected stream. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	StreamID	Device-wide unique ID of the data stream. Applies to: CoaXPress and blaze Visibility: Beginner Selected by: StreamSelector The feature documentation may provide more information.
	StreamSelector	Sets the stream channel. The parameter is 0-based in order to match the index of the C interface. Applies to: CoaXPress and blaze Visibility: Beginner Selecting Parameters: StreamID The feature documentation may provide more information.
	StrobePulseDelay	The delay of the flash signal in lines with respect to the image trigger input signal with respect to ExSync. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorByteAlignment8b10bLocked	Byte Alignment 8b10b locked Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorByteAlignment8b10bLockedSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorChannelCurrent	Returns the Channel Current. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorChannelCurrentSelector	Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorChannelVoltage	Returns the Channel Voltage. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorChannelVoltageSelector	Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorCurrentLinkSpeed	Returns the current PCIe link speed in Gigabits per second. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorCxpImageLineMode	This parameter informs about the current transfer mode used by the camera. The transfer mode can be an area scan (= 0) or line scan (= 1) image. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorCxpStandard	Returns the version of the used CXP standard. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorCxpStandardSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorDecoder8b10bError	Link stability counter. It is incremented when the number of measured symbols received by the channel transceiver are not in 8b10b encoding or/and have wrong disparity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorDecoder8b10bErrorSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorDisparity8b10bError	Disparity 8b 10b errors Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorExternalPower	Shows the external power state of the board. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorFpgaTemperature	Returns the current FPGA die temperature. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorFpgaVccAux	Returns the current FPGA auxiliary Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorFpgaVccBram	Returns the current FPGA BRAM Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorFpgaVccInt	Returns the current FPGA internal Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorMappedToFgPort	Indicates the frame grabber port mapping. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorMappedToFgPortSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorNotInTable8b10bError	Not in table 8b 10b errors Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorPacketbufferOverflowCount	The number of overflows that occur due to a not correct package order. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorPacketbufferOverflowSource	The port, which has overflows due to a not correct package order. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorPcieTrainedPayloadSize	Returns the PCIe packet size that was evaluated during the training period at boot-time. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorPcieTrainedRequestSize	Returns the size (in bytes) of the PCIe packets payload that are used for the data transmission between the frame grabber and the PCIe bridge. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorPortBitRate	Returns the port bit rate Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorPowerOverCxpState	Shows the current power over CXP state. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information.
	SystemmonitorRxLengthErrorCount	Counts how often the length of a CXP packet doesn't correspond to what is specified in the header and returns the number of length errors. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxLengthErrorCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxPacketCrcErrorCount	Returns the number of received packet CRC errors. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxPacketCrcErrorCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxStreamIncompleteCount	Returns the number of received incomplete stream counts. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxStreamIncompleteCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxUnknownDataReceivedCount	Returns the number of received unknown data, i.e. packets received that aren't defined in the CXP standard. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxUnknownDataReceivedCountSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxUnsupportedPacketUnit	Returns the number of received unsupported packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorRxUnsupportedPacketUnitSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorStreamPacketSize	Returns the stream packet size in bytes. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorStreamPacketSizeSelector	Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	SystemmonitorUsedCxpConnections	The currently used number of CXP ports used in this process. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TapGeometry	Select the tap geometry according to the GenICam SFNC. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerAcknowledgementCount	Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerCameraOutSelect	Sets the output source to be connected to a camera signal channel. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerEventCount	Number of trigger events sent to the camera. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerExceededPeriodLimits	Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerExceededPeriodLimitsClear	Clears the Trigger Exceeded Period Limits parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerFrontOutGPO0Polarity	Sets the front GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerFrontOutGPO1Polarity	Sets the front GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerFrontOutGPO2Polarity	Sets the front GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerFrontOutGPO3Polarity	Sets the front GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInDebounce	Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInDownscale	Factor by which the trigger input signal is downscaled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInDownscalePhase	Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInPolarity	Sets the polarity of the trigger input signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInSource	Sets the trigger input source for external trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsFrequency	Current frequency of the input pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsMaximumFrequency	Maximum input frequency detected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsMinimumFrequency	Minimum input frequency detected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsMinMaxFrequencyClear	Clears the minimum and maximum frequency values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsPolarity	Sets the polarity of the trigger input signal for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsPulseCount	Number of input pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsPulseCountClear	Clears the input signal pulse counter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerInStatisticsSource	Sets the trigger input source for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerMultiplyPulses	Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutFrontGPO0Source	Sets the signal source for the front GPO 0 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutFrontGPO1Source	Sets the signal source for the front GPO 1 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutFrontGPO2Source	Sets the signal source for the front GPO 2 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutFrontGPO3Source	Sets the signal source for the front GPO 3 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO0Polarity	Sets the GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO0Source	Sets the signal source for GPO 0 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO1Polarity	Sets the GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO1Source	Sets the signal source for GPO 1 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO2Polarity	Sets the GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO2Source	Sets the signal source for GPO 2 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO3Polarity	Sets the GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO3Source	Sets the signal source for GPO 3 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO4Polarity	Sets the GPO 4 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO4Source	Sets the signal source for GPO 4 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO5Polarity	Sets the GPO 5 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO5Source	Sets the signal source for GPO 5 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO6Polarity	Sets the GPO 6 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO6Source	Sets the signal source for GPO 6 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO7Polarity	Sets the GPO 7 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutGPO7Source	Sets the signal source for GPO 7 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutputEventSelect	Select the pulse form generator for event monitoring. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutputFrequency	Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectFrontGPO0	Sets the output source of Front GPO 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectFrontGPO1	Sets the output source of Front GPO 1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectFrontGPO2	Sets the output source of Front GPO 2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectFrontGPO3	Sets the output source of Front GPO 3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO0	Sets the output source of GPO 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO1	Sets the output source of GPO 1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO2	Sets the output source of GPO 2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO3	Sets the output source of GPO 3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO4	Sets the output source of GPO 4. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO5	Sets the output source of GPO 5. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO6	Sets the output source of GPO 6. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutSelectGPO7	Sets the output source of GPO 7. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutStatisticsPulseCount	Number of output pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutStatisticsPulseCountClear	Clears the output signal pulse counter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerOutStatisticsSource	Sets the output source for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator0Delay	Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator0Downscale	Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator0DownscalePhase	Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator0Width	Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator1Delay	Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator1Downscale	Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator1DownscalePhase	Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator1Width	Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator2Delay	Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator2Downscale	Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator2DownscalePhase	Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator2Width	Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator3Delay	Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator3Downscale	Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator3DownscalePhase	Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerPulseFormGenerator3Width	Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerQueueFillLevel	Fill level of the trigger queue. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerQueueFillLevelEventOffThreshold	The threshold for turning the queue fill level off. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerQueueFillLevelEventOnThreshold	The threshold for turning the queue fill level on. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerQueueMode	Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerState	Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	TriggerWaveViolation	Indicates a distance of two trigger edges violating the minimum edge frequency. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	UncorrectedErrorCount	Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	VantagePoint	Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight, the Height + YOffset must be smaller than SensorHeight. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	VisualAppletsBuildVersion	Returns the VisualApplets version used to build the applets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	Width	Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information.
	WriteTimeout	Write access timeout in milliseconds. Applies to: GigE Visibility: Beginner The feature documentation may provide more information.

PLTransportLayer.AppletRevision Property#

Indicates the revision number of the applet. Report this value when contacting the Basler support.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AppletVersion Property#

Returns the applet version. Please report the version if you are requesting support.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AreaTriggerMode Property#

Sets the trigger mode of the area trigger signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AutomaticFormatControl Property#

Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AutomaticROIControl Property#

Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.AutomaticTapGeometryControl Property#

Activates or deactivates the automatic control of the Tap Geometry in the Device. If this feature is active, the frame grabber Tap Geometry is automatically updated to the camera one.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.BitAlignment Property#

Sets the alignment of the bits in the output format.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CameraCorrectedErrorCount Property#

Counts the number of single-byte error corrections in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CameraUncorrectedErrorCount Property#

Counts the number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CommandDuplicationEnable Property#

Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.CompatibilityStatusAutomaticRoiControl Property#

Automatic ROI control status of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CompatibilityStatusPixelFormat Property#

Pixelformat status of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CompatibilityStatusTapGeometry Property#

Tap geometry status of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ConnectionGuardEnable Property#

Enables the automatic start of the PylonGigEConnectionGuard.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.CorrectedErrorCount Property#

Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomBitShiftRight Property#

User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomSignalEvent0Polarity Property#

Select the signal polarity for the custom signal event 0

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomSignalEvent0Source Property#

Select the signal source for the custom signal event 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomSignalEvent1Polarity Property#

Select the signal polarity for the custom signal event 1

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CustomSignalEvent1Source Property#

Select the signal source for the custom signal event 1

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpCameraFrameCorruptCount Property#

Counts the corrupted frames during acquisition.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpCameraFrameLostCount Property#

Counts the frames that were lost during acquisition and aren't sent into the applet image pipeline.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpCameraMarkerErrorCount Property#

Counts how often the sequence of the CXP stream marker and the header or the line markers were incorrect. The parameter is 13 bit wide, where the bits [11:0] represent the actual counter value and the bit [12] stands for the counter overflow. When the overflow bit is set, the counter value shall be treated as don't care.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpCameraUnexpectedStartupDataStatus Property#

Detects the error situation in which the first data value after the operator reset was unexpected, i.e. no image header has been received.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckIncompleteCount Property#

Counts situations in which an incorrectly formatted acknowledgment for a control packet was received. Incorrectly formatted means that e.g. the end of packet indicator is missing etc. Range 0 to 8191 (13 bit).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckIncompleteCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckLostCount Property#

Counts situations in which a control packet was sent but no acknowledgment packet was received for it yet and the timeout of 200 ms is reached.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckLostCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckPacketCrcError Property#

Returns information whether there were CRC errors in received control acknowledgement packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlAckPacketCrcErrorSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlTagErrorCount Property#

Counts situations in which an acknowledgment for a control packet was received with a tag that doesn't match the expected tag sent in the corresponding request control packet.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpControlTagErrorCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrected Property#

Counts errors received in packet headers and trailers that were corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedControlAck Property#

Returns the information whether errors were corrected in received stream acknowledge packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedControlAckSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedHeartbeat Property#

Returns the information whether errors were corrected in received heartbeat packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedHeartbeatSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedLinkTest Property#

Returns the information whether errors were corrected in received link test packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedLinkTestSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedStream Property#

Returns the information whether errors were corrected in received stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedStreamSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedTrigger Property#

Returns the information whether errors were corrected in received trigger packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedTriggerAck Property#

returns the information whether errors were corrected in received trigger acknowledge packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedTriggerAckSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorCorrectedTriggerSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrected Property#

Counts errors received in packet headers and trailers that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedControlAck Property#

Returns information whether there were errors in received control acknowledgement packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedControlAckSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedHeartbeat Property#

Returns information whether there were errors in received heartbeat packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedHeartbeatSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedLinkTest Property#

Returns information whether there were errors in received link test packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedLinkTestSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedStream Property#

Returns the information whether there were errors in received stream packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedStreamSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedTrigger Property#

Returns the information whether there were errors in received trigger packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedTriggerAck Property#

Returns the information whether there were errors in received trigger acknowledgement packets that haven't been corrected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedTriggerAckSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpErrorUncorrectedTriggerSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpHeartbeatIncompleteCount Property#

Counts the received heartbeat packets that are incomplete, e.g. they miss the end of the packet indicator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpHeartbeatIncompleteCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpHeartbeatMaxPeriodViolationCount Property#

Counts the situations in which heartbeat packets sent by the camera exceeded the timeout (100ms). Bits [11:0] count the amount of violations. Bit [12] is set when a counter overflow occurs.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpHeartbeatMaxPeriodViolationCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpImageTagErrorCount Property#

Returns the number of image tag errors (jumps) in the CXP headers.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpInputMappedToFWPortPort Property#

Returns the firmware CXP channel, which is currently monitored by the module.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpInputMappedToFWPortPortSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkConfiguration Property#

Sets the link configuration for the communication between the receiver and transmitter device.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger0Source Property#

Sets the output source for CXP LinkTrigger0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger0SourceEdge Property#

Selects the signal edge of the output signal on CXPLinkTrigger0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger1Source Property#

Sets the output source for CXP LinkTrigger1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger1SourceEdge Property#

Selects the signal edge of the output signal on CXP LinkTrigger1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger2Source Property#

Sets the output source for CXP LinkTrigger2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger2SourceEdge Property#

Selects the signal edge of the output signal on CXP LinkTrigger2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger3Source Property#

Sets the output source CXP LinkTrigger3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpLinkTrigger3SourceEdge Property#

Selects the signal edge of the output signal on CXP LinkTrigger3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpOvertriggerRequestPulseCount Property#

Counts the trigger requests that were skipped, because the transmitter was still busy by sending the previous trigger packet. Bit 12 indicates an overflow.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpOvertriggerRequestPulseCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamIDErrorCount Property#

Counts how often the received stream ID value in the stream packets mismatches the stream ID value specified in the image header. The parameter is 13 bit wide, where the bits [11:0] represent the actual counter value and the bit [12] stands for the counter overflow.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketCount Property#

Counts the amount of received stream packets. Bits [29:0] count the number of packets. Bit [30] is set when a counter overflow occurs.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketCrcError Property#

Returns information whether there were CRC errors in received stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketCrcErrorSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketLengthError Property#

Returns information whether a length error in the stream packets was detected. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpStreamPacketLengthErrorSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpTriggerAckMissingCount Property#

Counts the situations in which a trigger packet was sent, but no acknowledgment packet was received for it yet, which then led to a timeout. Bits [11:0] count the amount of violations. Bit [12] is set when a counter overflow occurs. Range 0 to 8191 (13 bit).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpTriggerAckMissingCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedEventReceived Property#

Returns information whether an event packet was received while using a CXP standard less than 2.0. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedEventReceivedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioAckReceived Property#

Returns information whether a GPIO acknowledgment was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioAckReceivedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioReceived Property#

Returns information whether a GPIO packet was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioReceivedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioRequestReceived Property#

Returns information whether a GPIO request from VisualApplets was received while using a CXP standard higher than 1.0. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedGpioRequestReceivedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedHeartbeatReceived Property#

Returns information whether a heartbeat packet was received while using a CXP standard less than 2.0. Range: 0 (NO) to 1 (YES).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.CxpUnsupportedHeartbeatReceivedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceAccessStatus Property#

Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceDisplayName Property#

User-friendly name of the device.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceEndianessMechanism Property#

Sets the endianness handling mode.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceID Property#

Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceManufacturerInfo Property#

Additional information about the manufacturer of the device.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.DeviceModelName Property#

Name of the device model. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.DeviceSerialNumber Property#

Serial number of the remote device. This value only changes when the Device Update List command is executed.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceType Property#

Returns the transport layer of the device.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.DeviceVendorName Property#

Name of the device vendor. This value only changes when the Device Update List command is executed.

Applies to: CoaXPress and blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.DigitalInput Property#

Read the current state of all digital inputs. You can read the current state of these inputs using this parameter. LSB Bit 0 of the read value represents input 0, bit 1 represents input 1 and so on. Bits 0 to 7 use GPI 0 to 7. Front GPI 0 to 3 are represented by bits 8 to 11.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTrigger Property#

AcquisitionTrigger

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTriggerSoftCounter Property#

Software counter for event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventAcquisitionTriggerTimestamp Property#

Timestamp of event 'AcquisitionTrigger'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatus Property#

CameraStreamStatus

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusCorrupted Property#

Event loss for type Corrupted occurred.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusEventType Property#

Event type (Corrupted or Lost)

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusFrameId Property#

Frame ID in which the event occurred.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusLost Property#

Event loss for type Lost occurred.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusLostAmount Property#

Amount of lost Lost events.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusSoftCounter Property#

Software counter for event 'CameraStreamStatus'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusStreamId Property#

Stream ID in which the event occurred.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventCameraStreamStatusTimestamp Property#

Timestamp of event 'CameraStreamStatus'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventDeviceLost Property#

Returns the unique Identifier of the Device Lost event.

Applies to: CoaXPress and blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventDeviceLostSoftCounter Property#

Software counter for event 'DeviceLost'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEnd Property#

FrameTransferEnd

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEndSoftCounter Property#

Software counter for event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferEndTimestamp Property#

Timestamp of event 'FrameTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStart Property#

FrameTransferStart

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStartSoftCounter Property#

Software counter for event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTransferStartTimestamp Property#

Timestamp of event 'FrameTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissed Property#

FrameTriggerMissed

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissedSoftCounter Property#

Software counter for event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventFrameTriggerMissedTimestamp Property#

Timestamp of event 'FrameTriggerMissed'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferEnd Property#

LineTransferEnd

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferEndSoftCounter Property#

Software counter for event 'LineTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferEndTimestamp Property#

Timestamp of event 'LineTransferEnd'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferStart Property#

LineTransferStart

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferStartSoftCounter Property#

Software counter for event 'LineTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventLineTransferStartTimestamp Property#

Timestamp of event 'LineTransferStart'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventNotification Property#

Sets whether the host application is notified of the selected event.

Applies to: CoaXPress and blaze

Visibility: Expert

Selected by: EventSelector

The feature documentation may provide more information.

PLTransportLayer.EventOverflow Property#

Overflow

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowFrameId Property#

Camera frame-ID for area scan applets or grabber frame-ID for line scan applets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsComplete Property#

Frame is complete.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsEndOfSequence Property#

Marks the end of a sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsLost Property#

Frame is lost.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowIsTruncated Property#

Frame is truncated.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowSoftCounter Property#

Software counter for event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventOverflowTimestamp Property#

Timestamp of event 'Overflow'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventSelector Property#

Sets which event to signal to the host application.

Applies to: CoaXPress and blaze

Visibility: Expert

Selecting Parameters: EventNotification

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimits Property#

TriggerExceededPeriodLimits

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimitsSoftCounter Property#

Software counter for event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerExceededPeriodLimitsTimestamp Property#

Timestamp of event 'TriggerExceededPeriodLimits'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOff Property#

TriggerQueueFilllevelThresholdOff

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOffSoftCounter Property#

Software counter for event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOffTimestamp Property#

Timestamp of event 'TriggerQueueFilllevelThresholdOff'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOn Property#

TriggerQueueFilllevelThresholdOn

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOnSoftCounter Property#

Software counter for event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.EventTriggerQueueFilllevelThresholdOnTimestamp Property#

Timestamp of event 'TriggerQueueFilllevelThresholdOn'

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ExSyncOn Property#

Enables or disables the ExSync output to the camera. Make sure that the camera is expecting this signal and interprets it in the expected way. The polarity of this signal is relevant for proper functionality.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ExSyncPolarity Property#

Sets the polarity of the ExSync output signal. Adjusts the polarity of the Exsync signal genarator to the polarity accepted by the connected camera. Use LowActive, if the camera starts exposure on a falling edge, otherwise use HighActive.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ExtensionGPOType Property#

Sets the configuration type of the extension GPIO interface.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FillLevel Property#

Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FlashOn Property#

Switches the flash signal on or off. The pulse width of the flash signal is equal to one line period. The flash gives a signal between the first and second Exsync rising edge. A single trigger is sent for a full frame.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FlashPolarity Property#

Sets the generated flash signal polarity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Format Property#

Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FrontGPI Property#

Current input signal levels of all front GPI inputs (bit mask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FrontGPIPullControl Property#

Sets the pull control of the front GPI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FrontGPISignalType Property#

Sets the signal type of the front GPI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.FrontGPOInversion Property#

Enables or disables the inversion of the front GPO.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GentlInfoIgnorefgformat Property#

Ignore the FG output format and manage it internally in the GenTL producer

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.GentlInfoVersion Property#

Version of the GenTL description Interface in the applet.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.GevDeviceGateway Property#

Current gateway IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceIPAddress Property#

Current IP address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceMACAddress Property#

48-bit MAC address of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GevDeviceSubnetMask Property#

Current subnet mask of the GVCP interface of the remote device.

Applies to: blaze

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.GPI Property#

The current input signal levels of all GPI inputs (bitmask).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.HeartbeatTimeout Property#

Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.Height Property#

Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageSelect Property#

Defines which image of an image sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageSelectPeriod Property#

Selects the length of an image sequence. Only one single image of the sequence is grabbed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerAsyncHeight Property#

The total image height in lines in case of multi buffer mode. Only relevant if a Multibuffer image trigger mode is used.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerDebouncing Property#

The debouncing time of the input image trigger. Signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time are filtered out.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerGateDelay Property#

The delay of the image gate in lines with respect to ExSync. The image trigger is delayed by a defined number of lines.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerInputPolarity Property#

Sets the polarity of the image trigger input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerInputSource Property#

Sets the image trigger input signal source, which is used to trigger the image acquisition. This is only relevant if the Image Trigger Mode is set to Extern/Gate.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerIsBusy Property#

With this read-only value it is possible to check whether the image trigger is busy, i.e. whether an image is currently being acquired. During this time an additional image trigger is ignored.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerMode Property#

Sets the trigger mode for the image generation. An image trigger can define the start and length of an image. FreeRun: All incoming lines received from the camera are accepted. Image size is defined by the ROI. ASync_External_Trigger: At the rising edge of an accepted image trigger input signal, a new frame is started and incoming lines are appended to an image up to ROI-Height. A new rising edge of the image trigger is only accepted after the current frame is finished. Gated_External_Trigger: In gated mode, the input signal active state Sets the height of the resulting frame. ROI-Height is the maximum height. _Multibuffer modes can handle a certain number of lines for multiple frames of ROI size.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ImageTriggerOn Property#

Enables or disables the image trigger module. The OFF state corresponds to FreeRun.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineDownscale Property#

The downscale factor of the line trigger input signal. Specifies the number of external input trigger signals, which are needed to generate a single Exsync. This is only relevant if the TriggerMode is set to an external ASync_trigger mode.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineDownscaleInit Property#

The phase of the downscaling with respect to the image gate. Specifies the number of external input signals, which are needed to generate the first Exsync of a frame. Exsync is used to trigger lines. This is only relevant if the TriggerMode is set to ASync_Trigger_Gated.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineExposure Property#

The length of the ExSync signal pulse. This parameter specifies the pulse width of the Exsync signal, which can be used by many cameras as externally defined exposure time. With this parameter it is possible to adjust the exposure time during runtime via software, even while grabbing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LinePeriod Property#

The length of the ExSync period. This parameter defines the line frequency when using the grabber controlled mode to send a trigger signal to the connected camera. The value of the line period needs to be greater than the line delay.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineTriggerDebouncing Property#

Specifies the debouncing time of the input line trigger, events, IO forwards and analyzers. The signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time will be filtered out.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineTriggerDelay Property#

The delay of the ExSync signal with respect to the trigger input signal. Specifies the delay of the generated ExSync signal, with respect to an external trigger input. The resulting ExSync2 signal is a delayed clone of the ExSync. Polarity, period, etc. are the same as for ExSync. The line delay needs to be less than the line period even for external trigger modes where the internal line period is not used.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineTriggerInPolarity Property#

Sets the polarity of the external input trigger signal encoder source A and source B. When set to LowActive, the Exsync generator starts on a falling edge of the signal specified as frame trigger. Otherwise, the Exsync generation starts on a rising edge. This is only relevant if the TriggerMode is set to Extern_Trigger.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineTriggerInSource Property#

Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source A when using a shaft encoder. This is only relevant, if the TriggerMode is set to ASync_Trigger.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LineTriggerMode Property#

Sets the operation mode for the Exsync signal generation. The source for the external trigger input can be selected via the parameters SourceA and SourceB. Grabber_Controlled: Exsync is generated periodically by the internal signal generator. ASync_Trigger: Each external trigger signal from a peripheral device is used to generate an ExSync based on the defined exposure time. Grabber_Controlled_Gated: Exsync is generated periodically by the internal signal generator during the acquisition of a frame. Extern_Trigger_Gated: An external trigger signal from a peripheral device is used to generate the ExSync during the acquisition of a frame only.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LinkCommandRetryCount Property#

Specifies maximum number of tries before failing the control channel commands.

Applies to: blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.LinkCommandTimeout Property#

Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error.

Applies to: blaze

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.LutCustomFile Property#

Filename with custom lookup table values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutEnable Property#

Switch the LUT and processing functionality on or off.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutImplementationType Property#

Type of LUT implementation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutInputPixelBitDepth Property#

The pixel's bit depth at the lookup table input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutOutputPixelBitDepth Property#

The pixel's bit depth at the lookup table output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutSaveFile Property#

Save current LUT configuration.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutType Property#

Enables the LUT to be loaded with custom values or uses the applet's processor.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValue Property#

Field with LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueBlue Property#

Field with blue LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueBlueSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueGreen Property#

Field with green LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueGreenSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueRed Property#

Field with red LUT Values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueRedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.LutValueSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.MaxRetryCountRead Property#

Maximum number of retries for read operations after a read operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MaxRetryCountWrite Property#

Maximum number of retries for write operations after a write operation has timed out.

Applies to: GigE

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MigrationModeEnable Property#

Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only.

Applies to: GigE and USB

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.MissingCameraFrameResponse Property#

Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.MissingCameraFrameResponseClear Property#

Clears the Missing Camera Frame Response parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OffsetX Property#

X-offset of the acquisition ROI, independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OffsetY Property#

Y-offset of the acquisition ROI, independent of the camera ROI.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OutputPackedFormats Property#

Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Overflow Property#

Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowEventSelect Property#

An overflow event can be generated on each incomplete, lost or correct frame. With this enumeration, you can select which permutation of these three events is reported via overflow event.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowOffThreshold Property#

Overflow handling will be inactive once the buffer filllevel is below this value.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowOnThreshold Property#

Overflow handling will be active once the buffer filllevel is above this value. Frames will be interrupted.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.OverflowSyncOnThreshold Property#

Overflow handling will be active once the buffer filllevel is above this value, after the currently active frame is completed.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PacketTagErrorCount Property#

Number of packet errors. This parameter indicates that CXP stream packets are lost.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PixelDepth Property#

Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.PixelFormat Property#

Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingGain Property#

Gain correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingGamma Property#

Gamma correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingInvert Property#

Invert output. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ProcessingOffset Property#

Offset correction value. Available when LUT functionality is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ReadTimeout Property#

Read access timeout value in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorBlue Property#

The blue gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorGreen Property#

The green gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ScalingFactorRed Property#

The red gain of the white balancing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SendSoftwareTrigger Property#

Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SensorHeight Property#

The sensor height in selected tap geometry. The value is ignored, if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SensorWidth Property#

The sensor width in selected tap geometry. The value is ignored if, Vantage Point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SetSoftwareTrigger Property#

Turns software trigger signal on or off. With this parameter a software gate can be produced in case of an externally gated image trigger mode.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderCompensationCount Property#

Reads or writes the current compensation count. Value 0 refers to no compensation. You can reset the compensator by writing 0 to the parameter. Is based on a 20-bit counter enabling a backward movement of up to 1048576 steps.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderCompensationEnable Property#

Enables or disables the shaft encoder rollback compensation. This parameter is relevant in case of a shaft encoder AB configuration. If switched to ON, in case of shaft encoder backward movement, the operator counts how many shaft encoder steps the shaft encoder moves backwards. When the shaft encoder moves forwards again, this number of shaft encoder steps (now forward direction) is not transmitted as external trigger signals. Only after the transportation belt is back to the place where the backward movement started, the shaft encoder steps (forward direction) are transmitted as external trigger signals again. If switched to OFF, the operator simply doesn't transmit any trigger signals as long as the transportation belt moves backwards. As soon as the transport belt starts to move forwards again, the operator transmits the shaft encoder steps (forward direction) as trigger signals.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderInputSource Property#

Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source B when using a shaft encoder. This is only relevant if the TriggerMode is set to ASync_Trigger.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderLeading Property#

Sets the leading signal / direction for the shaft encoder. A foreward movement is defined by a rising edge of signal A before signal B, if the parameter is set to Signal_AB. Source_A: Forward is defined by A before B. Source_B: Forward is defined by B before A.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderMode Property#

Sets the shaft encoder mode. Filter_x1: Exsync is generated for a forward rotation of the shaft encoder in single resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA. Filter_x2: Exsync is generated for a forward rotation of the shaft encoder in double resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA and a rising edge of LineTrgInSourceB. Filter_x4: Exsync is generated for a forward rotation of the shaft encoder in quad resolution, i.e., a trigger pulse for a rising and a falling edge of LineTrgInSourceA and a rising and a falling edge of LineTrgInSourceB.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.ShaftEncoderOn Property#

Enables or disbales the shaft encoder. Sets whether a single trigger input (off = A only) is used for the Exsync generation, or the signals A and B (on).

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0CurrentPeriod Property#

Returns the last measured period of the selected source and polarity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0MaxPeriod Property#

Returns the maximum measured period of the selected source and polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0MinPeriod Property#

Returns the minimum measured period of the selected source and polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0Polarity Property#

Sets the signal analyzer 0 polarity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0PulseCount Property#

Returns the number of rising edges e.g. pulses of the selected source and of the polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer0Source Property#

Sets the signal source analyzer module 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1CurrentPeriod Property#

Returns the last measured period of the selected source and polarity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1MaxPeriod Property#

Returns the maximum measured period of the selected source and the polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1MinPeriod Property#

Returns the minimum measured period of the selected source and the polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1Polarity Property#

Sets the signal analyzer module 0 polarity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1PulseCount Property#

Returns the number of rising edges e.g. pulses of the selected source and polarity after reset.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzer1Source Property#

Sets the signal source analyzer module 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzerClear Property#

Clears all measurement results.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SignalAnalyzerPulseCountDifference Property#

Use this read-only parameter to check the difference of the signal analyzer 0 and 1 pulse counter values (Analyzer 0 - Analyzer 1 value). This can be used to check for lost trigger signals, if analyzer 0 counts the ExSyc pulses and analyzer 1 counts the returned camera lines. In this case the difference is between 0 and 1 for single line cameras with no extra delay.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SoftwareTriggerIsBusy Property#

Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SoftwareTriggerQueueFillLevel Property#

Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StatisticReadWriteTimeoutCount Property#

Number of timeouts during read and write operations when waiting for a response from the device.

Applies to: GigE and blaze

Visibility: Guru

The feature documentation may provide more information.

PLTransportLayer.Statistic_Last_Error_Status Property#

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Last_Error_Status_Text Property#

Last error status of a read or write operation.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Read_Operations_Failed_Count Property#

Number of failed read operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Read_Pipe_Reset_Count Property#

Number of read pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Write_Operations_Failed_Count Property#

Number of failed write operations.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Statistic_Write_Pipe_Reset_Count Property#

Number of write pipe resets.

Applies to: USB

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StreamDisplayName Property#

User-friendly name of the selected stream.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.StreamID Property#

Device-wide unique ID of the data stream.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selected by: StreamSelector

The feature documentation may provide more information.

PLTransportLayer.StreamSelector Property#

Sets the stream channel. The parameter is 0-based in order to match the index of the C interface.

Applies to: CoaXPress and blaze

Visibility: Beginner

Selecting Parameters: StreamID

The feature documentation may provide more information.

PLTransportLayer.StrobePulseDelay Property#

The delay of the flash signal in lines with respect to the image trigger input signal with respect to ExSync.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorByteAlignment8b10bLocked Property#

Byte Alignment 8b10b locked

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorByteAlignment8b10bLockedSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelCurrent Property#

Returns the Channel Current.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelCurrentSelector Property#

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelVoltage Property#

Returns the Channel Voltage.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorChannelVoltageSelector Property#

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCurrentLinkSpeed Property#

Returns the current PCIe link speed in Gigabits per second.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCxpImageLineMode Property#

This parameter informs about the current transfer mode used by the camera. The transfer mode can be an area scan (= 0) or line scan (= 1) image.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCxpStandard Property#

Returns the version of the used CXP standard.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorCxpStandardSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorDecoder8b10bError Property#

Link stability counter. It is incremented when the number of measured symbols received by the channel transceiver are not in 8b10b encoding or/and have wrong disparity.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorDecoder8b10bErrorSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorDisparity8b10bError Property#

Disparity 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorExternalPower Property#

Shows the external power state of the board.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaTemperature Property#

Returns the current FPGA die temperature.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccAux Property#

Returns the current FPGA auxiliary Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccBram Property#

Returns the current FPGA BRAM Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorFpgaVccInt Property#

Returns the current FPGA internal Vcc.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorMappedToFgPort Property#

Indicates the frame grabber port mapping.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorMappedToFgPortSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorNotInTable8b10bError Property#

Not in table 8b 10b errors

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPacketbufferOverflowCount Property#

The number of overflows that occur due to a not correct package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPacketbufferOverflowSource Property#

The port, which has overflows due to a not correct package order.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPcieTrainedPayloadSize Property#

Returns the PCIe packet size that was evaluated during the training period at boot-time.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPcieTrainedRequestSize Property#

Returns the size (in bytes) of the PCIe packets payload that are used for the data transmission between the frame grabber and the PCIe bridge.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPortBitRate Property#

Returns the port bit rate

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorPowerOverCxpState Property#

Shows the current power over CXP state.

Applies to: CoaXPress

Visibility: Beginner

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxLengthErrorCount Property#

Counts how often the length of a CXP packet doesn't correspond to what is specified in the header and returns the number of length errors.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxLengthErrorCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxPacketCrcErrorCount Property#

Returns the number of received packet CRC errors.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxPacketCrcErrorCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxStreamIncompleteCount Property#

Returns the number of received incomplete stream counts.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxStreamIncompleteCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxUnknownDataReceivedCount Property#

Returns the number of received unknown data, i.e. packets received that aren't defined in the CXP standard.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxUnknownDataReceivedCountSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxUnsupportedPacketUnit Property#

Returns the number of received unsupported packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorRxUnsupportedPacketUnitSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorStreamPacketSize Property#

Returns the stream packet size in bytes.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorStreamPacketSizeSelector Property#

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.SystemmonitorUsedCxpConnections Property#

The currently used number of CXP ports used in this process.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TapGeometry Property#

Select the tap geometry according to the GenICam SFNC.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerAcknowledgementCount Property#

Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerCameraOutSelect Property#

Sets the output source to be connected to a camera signal channel.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerEventCount Property#

Number of trigger events sent to the camera.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerExceededPeriodLimits Property#

Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerExceededPeriodLimitsClear Property#

Clears the Trigger Exceeded Period Limits parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerFrontOutGPO0Polarity Property#

Sets the front GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerFrontOutGPO1Polarity Property#

Sets the front GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerFrontOutGPO2Polarity Property#

Sets the front GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerFrontOutGPO3Polarity Property#

Sets the front GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDebounce Property#

Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDownscale Property#

Factor by which the trigger input signal is downscaled.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInDownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInPolarity Property#

Sets the polarity of the trigger input signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInSource Property#

Sets the trigger input source for external trigger mode.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsFrequency Property#

Current frequency of the input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMaximumFrequency Property#

Maximum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMinimumFrequency Property#

Minimum input frequency detected.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsMinMaxFrequencyClear Property#

Clears the minimum and maximum frequency values.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPolarity Property#

Sets the polarity of the trigger input signal for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPulseCount Property#

Number of input pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsPulseCountClear Property#

Clears the input signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerInStatisticsSource Property#

Sets the trigger input source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerMultiplyPulses Property#

Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutFrontGPO0Source Property#

Sets the signal source for the front GPO 0 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutFrontGPO1Source Property#

Sets the signal source for the front GPO 1 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutFrontGPO2Source Property#

Sets the signal source for the front GPO 2 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutFrontGPO3Source Property#

Sets the signal source for the front GPO 3 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO0Polarity Property#

Sets the GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO0Source Property#

Sets the signal source for GPO 0 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO1Polarity Property#

Sets the GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO1Source Property#

Sets the signal source for GPO 1 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO2Polarity Property#

Sets the GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO2Source Property#

Sets the signal source for GPO 2 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO3Polarity Property#

Sets the GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO3Source Property#

Sets the signal source for GPO 3 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO4Polarity Property#

Sets the GPO 4 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO4Source Property#

Sets the signal source for GPO 4 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO5Polarity Property#

Sets the GPO 5 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO5Source Property#

Sets the signal source for GPO 5 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO6Polarity Property#

Sets the GPO 6 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO6Source Property#

Sets the signal source for GPO 6 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO7Polarity Property#

Sets the GPO 7 signal polarity. This parameter is ignored if the source is VCC or GND.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutGPO7Source Property#

Sets the signal source for GPO 7 output.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutputEventSelect Property#

Select the pulse form generator for event monitoring.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutputFrequency Property#

Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO0 Property#

Sets the output source of Front GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO1 Property#

Sets the output source of Front GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO2 Property#

Sets the output source of Front GPO 2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectFrontGPO3 Property#

Sets the output source of Front GPO 3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO0 Property#

Sets the output source of GPO 0.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO1 Property#

Sets the output source of GPO 1.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO2 Property#

Sets the output source of GPO 2.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO3 Property#

Sets the output source of GPO 3.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO4 Property#

Sets the output source of GPO 4. This parameter is not available on Light Bridge.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO5 Property#

Sets the output source of GPO 5. This parameter is not available on Light Bridge.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO6 Property#

Sets the output source of GPO 6. This parameter is not available on Light Bridge.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutSelectGPO7 Property#

Sets the output source of GPO 7. This parameter is not available on Light Bridge.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsPulseCount Property#

Number of output pulses.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsPulseCountClear Property#

Clears the output signal pulse counter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerOutStatisticsSource Property#

Sets the output source for statistics.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator0Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator1Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator2Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Delay Property#

Delay between the input and the output of the pulse form generator.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Downscale Property#

Downscale factor at the pulse form generator input.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3DownscalePhase Property#

Phase for selecting the desired pulse in the sequence.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerPulseFormGenerator3Width Property#

Width of the output signal.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevel Property#

Fill level of the trigger queue.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevelEventOffThreshold Property#

The threshold for turning the queue fill level off.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueFillLevelEventOnThreshold Property#

The threshold for turning the queue fill level on.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerQueueMode Property#

Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerState Property#

Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.TriggerWaveViolation Property#

Indicates a distance of two trigger edges violating the minimum edge frequency.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.UncorrectedErrorCount Property#

Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.VantagePoint Property#

Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight, the Height + YOffset must be smaller than SensorHeight.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.VisualAppletsBuildVersion Property#

Returns the VisualApplets version used to build the applets.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.Width Property#

Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.

Applies to: CoaXPress

Visibility: Expert

The feature documentation may provide more information.

PLTransportLayer.WriteTimeout Property#

Write access timeout in milliseconds.

Applies to: GigE

Visibility: Beginner

The feature documentation may provide more information.