Basler Vision Connector Messaging: Saving the Camera Configuration#

With the GenICam protocol you can store parameter sets on the camera, and with the Basler Vision Connector you can save, load, and define the default user set to be used on camera restart.

After the camera has been parametrized, you can save the current parameters in a user set. To save the configuration, send the SaveUserSet message.

JSON Payload#

Field	Optional	键入	描述
TransactionID	是	String	Transaction identification
操作	无	String	Method called. Fixed value: `SaveUserSet`
DeviceID	无	String	Device identification
UserSet	无	String/ Integer (64-bit signed)	{Value} or {IntValue} of the User Set Object as defined in Retrieving Available User Sets

{
  "TransactionID": "489494",
  "Action": "SaveUserSet",
  "DeviceID": "548451842342387",
  "UserSet": "UserSet2"
}

Response Object#

Field	Optional	键入	描述
TransactionID	是	String	Transaction identification
ReturnCode	无	Integer (32-bit unsigned)	Message code following Message Codes
消息	是	String	Response message

{
  "TransactionID": "489494",
  "ReturnCode": 0,
  "Message": "User set updated."
}