dmA720-290gc#
规格#
通用规格#
| dmA720-290gc | |
|---|---|
| 分辨率（H×V 像素） | 728 x 544（全分辨率） 720 x 540（默认分辨率） 您可以通过更改图像 ROI 来更改分辨率。 |
| 分辨率 | VGA |
| 传感器类型 | Sony IMX287LQR-C 逐行扫描 CMOS 全局快门 |
| 传感器格式 | 1/2.9" |
| 传感器有效对角线尺寸 | 6.3 mm |
| 像素尺寸 (H × V) | 6.90 x 6.90 μm |
| 帧速率（默认设置下） | 291 fps (at default resolution) 274 fps (at default settings) Conditions: default resolution, Packet Size set to 4000 and Bandwidth Reserve to 5. |
| 产品系列 | dart M |
| 单色/彩色 | 彩色 |
| 图像数据接口 | 快速以太网 (100 Mbit/s) 千兆以太网 (1000 Mbit/s) |
| 像素格式 | 请参阅 Pixel Format。 |
| 同步方式 | 通过硬件触发 通过软件触发 通过自由运行 |
| 曝光时间控制 | 通过硬件触发 通过相机 API 编程 |
| 相机电源要求 | ≈3.0 W (typical) @ 5 VDC |
| I/O 线路 | 1 general purpose input line 1 general purpose output line When using a Basler dart M Interface Board: 1 opto-coupled input line 1 general purpose output line 1 general purpose I/O (GPIO) line |
| 镜头接口 | S-mount and CS-mount available as accessories |
| 尺寸（长x宽x高） | 27.3 x 27.3 x 13.9 mm |
| 重量 | <14 g |
| 符合标准 | CE (includes RoHS), UKCA, EAC, FCC, KC, GenICam, GigE Vision, REACH Certificates for your camera model For more information, see the Compliance section of the Basler website. |
| 软件 | Basler pylon Software Suite (version 4.0 or higher) Available for Windows, Linux x86, Linux ARM, macOS, and Android |
| 配件 | dart Camera Mounts dart M Screw Kit for Mount Attachment dart Flexible Flat Cables dart M Interface Boards dart I/O Cable Heat Sink for dart |
| 有售性和定价 | 请参阅 Basler 网站上的产品页面。 |
光谱响应#
光谱响应曲线不包括镜头特性、光源特性和红外截止滤光片特性。
机械规格#
尺寸和安装点#
→ 下载您的 Basler 相机的 CAD/技术图纸。
信息
If you use a camera mount, different dimensions apply. For more information, see dart M Camera Mounts.
The top and bottom of the image sensor, as shown in the image above, correspond to the top and bottom of the delivered image (see below).
安装说明#
→ 请参阅安装说明。
压力测试结果#
→ 请参阅压力测试结果。
要求#
环境要求#
温度和湿度#
| 描述 | 温度 |
|---|---|
| 工作期间的设备温度 | 0–75 °C (32–167 °F)a |
| 存放期间的设备温度 | -20-80 °C (-4-176 °F) |
| 湿度 | 20-80%，相对湿度，无冷凝 |
-
温度在温度测量点（即板上最热的点）测得。这一点比板上的其他部分温度要高得多。
散热#
CAUTION – Temperatures outside of the specified range may cause burns or lead to a camera shutdown.
Operating the camera module at temperatures outside of the range given in the camera specification causes the following problems:
- The camera module gets hot and may cause burns when touching it.
- Operating the camera module without heat dissipation may lead to a shutdown of the camera module in order to protect its electrical components.
- The camera module's lifetime decreases.
确保充分散热。
→ 请参阅提供散热。
电气要求#
For information about the camera power requirements, see the General Specifications table above.
→ If you want to connect the camera module to Basler hardware, see dart M Interface Boards.
→ If you want to connect the camera module to custom hardware, see dart M Interface Description.
物理接口#
FFC Connector#
The FFC connector provides an interface to a dart M Interface Board via the dart M FFC cable.
You can also connect custom hardware. For more information, see dart M Interface Description.
I/O Pinout#
→ If you want to connect the camera module to Basler hardware, see dart M Interface Boards.
→ If you want to connect the camera module to custom hardware, see dart M Interface Description.
预防措施#
→ 请参阅安全说明（dart 相机）。
安装#
→请参阅相机安装。
功能#
→ 请参阅功能部分。