压力测试结果#
相机已提交给独立机械测试实验室，并接受了下列压力测试。机械压力测试是在选定的相机型号上进行的。经过机械测试后，在标准操作测试期间，这些相机均未发现可检测到的物理损坏，并且生成了正常图像。
| 测试 | 标准 | 条件 |
|---|---|---|
| 正弦（每根轴） | DIN EN 60068-2-6 | 10–58 Hz/1.5 mm；58–500 Hz / 20 g；1 倍频程/分钟 10 次重复 |
| 冲击（每根轴） | DIN EN 60068-2-27 | 20 g / 11 ms / 100 次冲击（正向） 20 g / 11 ms / 100 次冲击（负向） |
| 随机（每根轴） | DIN EN 60068-2-64 | 15-500 Hz / 0.05 PSD（ESS 标准配置文件）/ 00:30 h |
ace, ace 2, and racer 2 S Cameras#
机械压力测试是在有虚拟镜头连接到 C 口的情况下执行的。虚拟镜头长 35 毫米，重 67 克。如果使用更重或更长的镜头，需要额外的镜头支撑。
boost 相机#
- The mechanical stress tests for cameras with a C-mount were performed with a dummy lens attached. The dummy lens was 35 mm long and had a mass of 67 g. Using a heavier lens requires an additional support for the lens.
- The mechanical stress tests for cameras with an F-mount were performed with a dummy lens attached. The dummy lens was 48 mm long and had a mass of 246 g. Using a heavier lens requires an additional support for the lens.
pulse Cameras#
机械压力测试是在装有虚拟镜头的情况下进行的。虚拟镜头的质量为 67 克。
dart Classic/E/R Cameras#
- S 卡口相机的机械应力测试是在装有仿真镜头的情况下进行的。仿真镜头的质量为 30g。如果使用较重的镜头，则需要额外的镜头支撑。
- The mechanical stress tests for CS-mount cameras were performed with a dummy lens attached. The dummy lens had a mass of 67 g. Using a heavier lens requires an additional support for the lens.
- 裸板相机：由于裸板型号的电路板与 S 卡口和 CS 卡口型号的电路板相同，因此不会对裸板相机进行单独的压力测试。
dart M Cameras#
The mechanical stress tests for dart M cameras were performed with dart M bare board models.
As the components of the S-mounts and CS-mounts used for dart M cameras are identical to the mount components of the dart Classic/R cameras, the stress results are also valid for the S-mounts and CS-mounts of the dart M cameras.