Skip to content

Basler_UniversalCameraParams::CUniversalCameraParams_Params#

A parameter class containing all parameters as members that are available for Basler camera devices. More…

#include <pylon/_BaslerUniversalCameraParams.h>

Inherits from Basler_UniversalCameraParams::CUniversalCameraParams_Params_v9_0_0

Inherited by Pylon::CDeviceSpecificInstantCameraT< CBaslerUniversalInstantCameraTraits >

Public Attributes#

Name
Pylon::ICommandEx & AcquisitionAbort
Aborts the acquisition of images - Applies to: CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IIntegerEx & AcquisitionFrameCount
Number of frames to acquire for each Acquisition Start trigger - Applies to: CameraLink, GigE and Stereo ace.
Pylon::IBooleanEx & AcquisitionFrameRateEnable
Enables setting the camera's acquisition frame rate to a specified value - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IBooleanEx & AcquisitionIdle
A check determines whether the camera is currently idle - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< AcquisitionModeEnums > & AcquisitionMode
Sets the image acquisition mode - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::ICommandEx & AcquisitionStart
Starts the acquisition of images - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IBooleanEx & AcquisitionStatus
Indicates whether the camera is waiting for trigger signals - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< AcquisitionStatusSelectorEnums > & AcquisitionStatusSelector
Sets the signal whose status you want to check - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::ICommandEx & AcquisitionStop
Stops the acquisition of images - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< ExposureAutoEnums > & ExposureAuto
Sets the operation mode of the Exposure Auto auto function - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IEnumParameterT< ExposureModeEnums > & ExposureMode
Sets the exposure mode - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< ExposureOverlapTimeModeEnums > & ExposureOverlapTimeMode
Sets the exposure overlap time mode - Applies to: GigE and ace USB.
Pylon::IFloatEx & ExposureTimeAbs
Exposure time of the camera in microseconds - Applies to: CamEmu, CameraLink and GigE.
Pylon::IFloatEx & ExposureTimeBaseAbs
Timebase (in microseconds) that the camera uses when the exposure time is specified using the Exposure Time (Raw) parameter - Applies to: CamEmu, CameraLink and GigE.
Pylon::IEnumParameterT< ExposureTimeModeEnums > & ExposureTimeMode
Sets the exposure time mode - Applies to: GigE, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IIntegerEx & ExposureTimeRaw
Exposure time of the camera (raw value) - Applies to: CamEmu, CameraLink and GigE.
Pylon::IFloatEx & ResultingFrameRateAbs
Maximum frame acquisition rate with current camera settings - Applies to: CamEmu, CameraLink and GigE.
Pylon::IEnumParameterT< SensorReadoutModeEnums > & SensorReadoutMode
Sets the sensor readout mode - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< ShutterModeEnums > & ShutterMode
Sets the shutter mode of the camera - Applies to: CameraLink, GigE and ace USB.
Pylon::IBooleanEx & SyncFreeRunTimerEnable
Enables the synchronous free run mode - Applies to: GigE and blaze.
Pylon::IIntegerEx & SyncFreeRunTimerStartTimeHigh
High 32 bits of the synchronous free run trigger start time - Applies to: GigE and blaze.
Pylon::IIntegerEx & SyncFreeRunTimerStartTimeLow
Low 32 bits of the synchronous free run trigger start time - Applies to: GigE and blaze.
Pylon::ICommandEx & SyncFreeRunTimerUpdate
Updates synchronous free run settings - Applies to: GigE and blaze.
Pylon::IEnumParameterT< TriggerActivationEnums > & TriggerActivation
Sets the type of signal transition that will activate the selected trigger - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< TriggerModeEnums > & TriggerMode
Sets the mode for the currently selected trigger - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< TriggerSelectorEnums > & TriggerSelector
Sets the trigger type to be configured - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::ICommandEx & TriggerSoftware
Generates a software trigger signal - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< TriggerSourceEnums > & TriggerSource
Sets the source signal for the selected trigger - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & AcquisitionBurstFrameCount
Number of frames to acquire for each Frame Burst Start trigger - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IFloatEx & AcquisitionFrameRate
Acquisition frame rate of the camera in frames per second - Applies to: CamEmu, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IFloatEx & AcquisitionLineRate
Acquisition line rate of the camera in kHz - Applies to: racer 2 CXP.
Pylon::IBooleanEx & AcquisitionLineRateEnable
Enables setting the camera's acquisition line rate to a specified value - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< AcquisitionStopModeEnums > & AcquisitionStopMode
Controls how the AcquisitionStop command ends an ongoing frame - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslAcquisitionAlternateFilterEnums > & BslAcquisitionAlternateFilter
Filter images if LineSource is ExposureAlternateActive - Applies to: Stereo ace.
Pylon::IEnumParameterT< BslAcquisitionBurstModeEnums > & BslAcquisitionBurstMode
Sets the burst mode - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslAcquisitionMultiPartModeEnums > & BslAcquisitionMultiPartMode
Control which components are sent in a MultiPart buffer - Applies to: Stereo ace.
Pylon::IEnumParameterT< BslAcquisitionStopModeEnums > & BslAcquisitionStopMode
Sets whether Acquisition Stop commands abort exposure - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IFloatEx & BslEffectiveExposureTime
Current exposure time of the camera in microseconds - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart USB and racer 2 CXP.
Pylon::IFloatEx & BslExposureStartDelay
Exposure start delay with current settings - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslExposureTimeModeEnums > & BslExposureTimeMode
Sets the exposure time mode - Applies to: ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslFlashWindowDelay
Indicates the delay between the start of exposure and the start of the flash window in microseconds - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress and dart USB.
Pylon::IFloatEx & BslFlashWindowDuration
Indicates the width of the flash window in microseconds - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress and dart USB.
Pylon::IEnumParameterT< BslImmediateTriggerModeEnums > & BslImmediateTriggerMode
Enables the Immediate Trigger mode - Applies to: dart USB and pulse USB.
Pylon::IFloatEx & BslResultingAcquisitionFrameRate
Maximum number of frames that can be acquired per second with current camera settings - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IFloatEx & BslResultingAcquisitionLineRate
Maximum number of lines in kHz that can be acquired with current camera settings - Applies to: racer 2 CXP.
Pylon::IFloatEx & BslResultingFrameBurstRate
Maximum number of bursts per second with current camera settings - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB and dart USB.
Pylon::IFloatEx & BslResultingTransferFrameRate
Maximum number of frames that can be transferred per second with current camera settings - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IFloatEx & BslResultingTransferLineRate
Maximum number of lines that can be transferred per second with current camera settings - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslSensorAcquisitionModeEnums > & BslSensorAcquisitionMode
Sets the sensor acquisition mode - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslSensorBitDepthEnums > & BslSensorBitDepth
Sets the bit depth of the image sensor's data output - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslSensorBitDepthModeEnums > & BslSensorBitDepthMode
Sets the sensor bit depth mode - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslSensorOff
Switches the sensor power off - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslSensorOn
Switches the sensor power on - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslSensorStandby
Puts the sensor in standby mode - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslSensorStateEnums > & BslSensorState
Returns the current power state of the sensor - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslTransferBitDepthEnums > & BslTransferBitDepth
Sets the bit depth used for internal image processing - Applies to: ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslTransferBitDepthModeEnums > & BslTransferBitDepthMode
Sets the transfer bit depth mode - Applies to: ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & ExposureOverlapTimeMax
Maximum overlap of the sensor exposure with sensor readout in Trigger Width exposure mode (in microseconds) - Applies to: ace USB.
Pylon::IFloatEx & ExposureTime
Exposure time of the camera in microseconds - Applies to: CamEmu, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< ExposureTimeSelectorEnums > & ExposureTimeSelector
Sets which component the Exposure Time parameter value applies to - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart USB and racer 2 CXP.
Pylon::IIntegerEx & FrameDuration
Total time required for exposing and reading out all subframes from the sensor - Applies to: blaze.
Pylon::IEnumParameterT< OverlapModeEnums > & OverlapMode
Configures overlapping exposure and image readout - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & ReadoutTime
Time required for reading out each subframe from the sensor - Applies to: blaze.
Pylon::IIntegerEx & ResetTime
Time during which the sensor is reset before the next subframe is acquired - Applies to: blaze.
Pylon::IFloatEx & ResultingFrameRate
Maximum frame acquisition rate with current camera settings - Applies to: ace USB, boost CoaXPress, dart USB and pulse USB.
Pylon::IFloatEx & SensorReadoutTime
Sensor readout time with current settings - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< SensorShutterModeEnums > & SensorShutterMode
Sets the shutter mode of the camera - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IIntegerEx & StartupTime
Time that passes between triggering the camera and exposure starting - Applies to: blaze.
Pylon::IFloatEx & TriggerDelay
Trigger delay time in microseconds - Applies to: CamEmu, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IFloatEx & AcquisitionFrameRateAbs
Acquisition frame rate of the camera in frames per second - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< AcquisitionFrameRateEnumEnums > & AcquisitionFrameRateEnum
Applies to: CameraLink.
Pylon::IFloatEx & AcquisitionLineRateAbs
Acquisition line rate of the camera in lines per second - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & EnableBurstAcquisition
Enables Burst Acquisition - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ExposureOverlapTimeMaxAbs
Maximum overlap of the sensor exposure with sensor readout in Trigger Width exposure mode (in microseconds) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & ExposureOverlapTimeMaxRaw
Maximum overlap of the sensor exposure with sensor readout in Trigger Width exposure mode (raw value) - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ExposureStartDelayAbs
Applies to: CameraLink and GigE.
Pylon::IIntegerEx & ExposureStartDelayRaw
Applies to: CameraLink and GigE.
Pylon::IBooleanEx & ExposureTimeBaseAbsEnable
Enables the use of the exposure timebase - Applies to: CameraLink and GigE.
Pylon::IFloatEx & FrameTimeoutAbs
Frame timeout in microseconds - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & FrameTimeoutEnable
Enables the frame timeout - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< InterlacedIntegrationModeEnums > & InterlacedIntegrationMode
Selects the Interlaced Integration Mode - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ReadoutTimeAbs
Sensor readout time with current settings - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ResultingFramePeriodAbs
Maximum frame acquisition period with current camera settings - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ResultingLinePeriodAbs
Maximum line acquisition period with current camera settings - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ResultingLineRateAbs
Maximum line acquisition rate with current camera settings - Applies to: CameraLink and GigE.
Pylon::IFloatEx & SyncFreeRunTimerTriggerRateAbs
Synchronous free run trigger rate - Applies to: GigE.
Pylon::IEnumParameterT< TriggerControlImplementationEnums > & TriggerControlImplementation
Sets the image acquisition control mode - Applies to: CameraLink and GigE.
Pylon::IFloatEx & TriggerDelayAbs
Trigger delay time in microseconds - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & TriggerDelayLineTriggerCount
Trigger delay as number of line triggers - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< TriggerDelaySourceEnums > & TriggerDelaySource
Sets the kind of trigger delay - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & TriggerPartialClosingFrame
Determines whether a partial or a complete frame is transmitted when the Frame Start trigger signal transitions prematurely - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AcquisitionStartEventStreamChannelIndex
Stream channel index of the Acquisition Start event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionStartEventTimestamp
Timestamp of the Acquisition Start event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionStartOvertriggerEventStreamChannelIndex
Stream channel index of the Acquisition Start Overtrigger event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionStartOvertriggerEventTimestamp
Timestamp of the Acquisition Start Overtrigger event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionStartWaitEventStreamChannelIndex
Stream channel index of the Acquisition Start Wait event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionStartWaitEventTimestamp
Timestamp of the Acquisition Start Wait event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionWaitEventStreamChannelIndex
Stream channel index of the Acquisition Wait event - Applies to: GigE.
Pylon::IIntegerEx & AcquisitionWaitEventTimestamp
Timestamp of an Acquisition Wait event - Applies to: GigE.
Pylon::IIntegerEx & ActionCommandCount
Number of separate action signals supported by the camera - Applies to: GigE.
Pylon::IIntegerEx & ActionDeviceKey
Device key used for action commands - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & ActionGroupKey
Group key used for action commands - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & ActionGroupMask
Group mask used for action commands - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & ActionQueueSize
Number of action commands that can be queued by the camera - Applies to: ace 2 GigE.
Pylon::IIntegerEx & ActionSelector
Action command to be configured - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & NumberOfActionSignals
Number of separate action signals supported by the camera - Applies to: GigE.
Pylon::IIntegerEx & ActionLateEventStreamChannelIndex
Stream channel index of the Action Late event - Applies to: GigE.
Pylon::IIntegerEx & ActionLateEventTimestamp
Timestamp of the Action Late event - Applies to: GigE.
Pylon::IFloatEx & AutoBacklightCompensation
Backlight compensation to be applied - Applies to: dart USB and pulse USB.
Pylon::IFloatEx & AutoTargetBrightness
Target brightness for the Gain Auto and the Exposure Auto auto functions - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IFloatEx & AutoTargetBrightnessDamping
Brightness adjustment damping factor to be applied - Applies to: dart USB and pulse USB.
Pylon::IFloatEx & AutoExposureTimeAbsLowerLimit
Lower limit of the Exposure Time parameter when the Exposure Auto auto function is active - Applies to: CameraLink and GigE.
Pylon::IFloatEx & AutoExposureTimeAbsUpperLimit
Upper limit of the Exposure Time parameter when the Exposure Auto auto function is active - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoExposureTimeLowerLimitRaw
Lower limit of the Exposure Time parameter when the Exposure Auto auto function is active (raw value) - Applies to: GigE.
Pylon::IIntegerEx & AutoExposureTimeUpperLimitRaw
Upper limit of the Exposure Time parameter when the Exposure Auto auto function is active (raw value) - Applies to: GigE.
Pylon::IIntegerEx & AutoGainRawLowerLimit
Lower limit of the Gain parameter when the Gain Auto auto function is active (raw value) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoGainRawUpperLimit
Upper limit of the Gain parameter when the Gain Auto auto function is active (raw value) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoTargetValue
Target brightness for the Gain Auto and the Exposure Auto auto functions - Applies to: CameraLink and GigE.
Pylon::IFloatEx & BalanceWhiteAdjustmentDampingAbs
Balance White adjustment damping factor to be applied - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & BalanceWhiteAdjustmentDampingRaw
Balance White adjustment damping factor to be applied (raw value) - Applies to: CameraLink and GigE.
Pylon::IFloatEx & GrayValueAdjustmentDampingAbs
Gray value adjustment damping factor to be applied - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & GrayValueAdjustmentDampingRaw
Gray value adjustment damping factor (raw value) to be applied - Applies to: CameraLink and GigE.
Pylon::IFloatEx & AutoExposureTimeLowerLimit
Lower limit of the Exposure Time parameter when the Exposure Auto auto function is active - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IFloatEx & AutoExposureTimeUpperLimit
Upper limit of the Exposure Time parameter when the Exposure Auto auto function is active - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IIntegerEx & AutoFunctionAOIHeight
Height of the auto function AOI (in pixels) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoFunctionAOIOffsetX
Horizontal offset of the auto function AOI from the left side of the sensor (in pixels) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoFunctionAOIOffsetY
Vertical offset from the top of the sensor to the auto function AOI (in pixels) - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< AutoFunctionAOISelectorEnums > & AutoFunctionAOISelector
Sets which auto function AOI can be configured - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & AutoFunctionAOIUsageIntensity
Assigns the Gain Auto and the Exposure Auto auto functions to the currently selected auto function AOI - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & AutoFunctionAOIUsageRedLightCorrection
Assigns the Red Light Correction auto function to the currently selected auto function AOI - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & AutoFunctionAOIUsageTonalRange
Assigns the Tonal Range Auto auto function to the currently selected auto function AOI - Applies to: GigE.
Pylon::IBooleanEx & AutoFunctionAOIUsageWhiteBalance
Assigns the Balance White Auto auto function to the currently selected auto function AOI - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & AutoFunctionAOIWidth
Width of the auto function AOI (in pixels) - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & AutoFunctionAOIUseBrightness
Assigns the Gain Auto and the Exposure Auto auto functions to the currently selected auto function AOI - Applies to: ace USB.
Pylon::IBooleanEx & AutoFunctionAOIUseWhiteBalance
Assigns the Balance White auto function to the currently selected auto function AOI - Applies to: ace USB.
Pylon::IEnumParameterT< AutoFunctionProfileEnums > & AutoFunctionProfile
Sets how gain and exposure time will be balanced when the camera is making automatic adjustments - Applies to: CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IIntegerEx & AutoFunctionROIHeight
Height of the auto function ROI (in pixels) - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IBooleanEx & AutoFunctionROIHighlight
Highlights the current auto function ROI in the image window - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB and dart USB.
Pylon::IIntegerEx & AutoFunctionROIOffsetX
Horizontal offset of the auto function ROI from the left side of the sensor (in pixels) - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IIntegerEx & AutoFunctionROIOffsetY
Vertical offset from the top of the sensor to the auto function ROI (in pixels) - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IEnumParameterT< AutoFunctionROISelectorEnums > & AutoFunctionROISelector
Sets which auto function ROI can be configured - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IBooleanEx & AutoFunctionROIUseBrightness
Assigns the Gain Auto and the Exposure Auto auto functions to the currently selected auto function ROI - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IBooleanEx & AutoFunctionROIUseTonalRange
Assigns the Tonal Range Auto auto function to the currently selected auto function ROI - Applies to: ace USB.
Pylon::IBooleanEx & AutoFunctionROIUseWhiteBalance
Assigns the Balance White Auto auto function to the currently selected auto function ROI - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IIntegerEx & AutoFunctionROIWidth
Width of the auto function ROI (in pixels) - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IFloatEx & AutoGainLowerLimit
Lower limit of the Gain parameter when the Gain Auto auto function is active - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and pulse USB.
Pylon::IFloatEx & AutoGainUpperLimit
Upper limit of the Gain parameter when the Gain Auto auto function is active - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IEnumParameterT< AutoTonalRangeAdjustmentSelectorEnums > & AutoTonalRangeAdjustmentSelector
Sets which parts of the tonal range can be adjusted - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< AutoTonalRangeModeSelectorEnums > & AutoTonalRangeModeSelector
Sets the kind of tonal range auto adjustment - Applies to: GigE and ace USB.
Pylon::IIntegerEx & AutoTonalRangeTargetBright
Bright target value to be used during automatic tonal range adjustments - Applies to: GigE and ace USB.
Pylon::IIntegerEx & AutoTonalRangeTargetDark
Dark target value to be used during automatic tonal range adjustments - Applies to: GigE and ace USB.
Pylon::IFloatEx & AutoTonalRangeThresholdBright
Threshold value from which the Tonal Range Source Bright parameter value is calculated during automatic tonal range adjustments - Applies to: GigE and ace USB.
Pylon::IIntegerEx & AutoTonalRangeThresholdBrightRaw
Threshold value from which the Tonal Range Source Bright parameter value is calculated during automatic tonal range adjustments (raw value) - Applies to: GigE.
Pylon::IFloatEx & AutoTonalRangeThresholdDark
Threshold value from which the Tonal Range Source Dark parameter value is calculated during automatic tonal range adjustments - Applies to: GigE and ace USB.
Pylon::IIntegerEx & AutoTonalRangeThresholdDarkRaw
Threshold value from which the Tonal Range Source Dark parameter value is calculated during automatic tonal range adjustments (raw value) - Applies to: GigE.
Pylon::IBooleanEx & BLCSerialFramingError
A serial framing error occurred on reception - Applies to: GigE and ace USB.
Pylon::IBooleanEx & BLCSerialParityError
A serial parity error occurred on reception - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialPortBaudRateEnums > & BLCSerialPortBaudRate
Reports the baud rate of the serial communication module - Applies to: GigE and ace USB.
Pylon::ICommandEx & BLCSerialPortClearErrors
Clears the error flags of the serial communication module - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialPortParityEnums > & BLCSerialPortParity
Reports the parity bit configuration of the serial communication module - Applies to: GigE and ace USB.
Pylon::ICommandEx & BLCSerialPortReceiveCmd
Reads and removes the front byte value from the serial communication receive queue - Applies to: GigE and ace USB.
Pylon::IIntegerEx & BLCSerialPortReceiveValue
Last byte value read from the serial communication receive queue - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialPortSourceEnums > & BLCSerialPortSource
Sets the signal source for the serial communication module - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialPortStopBitsEnums > & BLCSerialPortStopBits
Reports the number of stop bits used by the serial communication module - Applies to: GigE and ace USB.
Pylon::ICommandEx & BLCSerialPortTransmitCmd
Writes the current byte value to the transmit queue - Applies to: GigE and ace USB.
Pylon::IIntegerEx & BLCSerialPortTransmitValue
Byte value to be written to the transmit queue - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialReceiveQueueStatusEnums > & BLCSerialReceiveQueueStatus
Reports the status of the serial communication receive queue - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BLCSerialTransmitQueueStatusEnums > & BLCSerialTransmitQueueStatus
Reports the status of the serial communication transmit queue - Applies to: GigE and ace USB.
Pylon::IFloatEx & BalanceRatio
Balance Ratio value to be applied to the currently selected channel - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IFloatEx & BalanceRatioAbs
Balance Ratio value to be applied to the currently selected channel - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & BalanceRatioRaw
Balance Ratio value to be applied to the currently selected channel (raw value) - Applies to: CameraLink and GigE.
Pylon::ICommandEx & BalanceWhiteReset
Resets all white balance adjustments - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & ColorAdjustmentEnable
Enables color adjustment - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ColorAdjustmentHue
Hue adjustment value to be applied to the currently selected color channel - Applies to: CameraLink, GigE and ace USB.
Pylon::IIntegerEx & ColorAdjustmentHueRaw
Hue adjustment value to be applied to the currently selected color channel (raw value) - Applies to: CameraLink and GigE.
Pylon::ICommandEx & ColorAdjustmentReset
Allows you to restore previous color adjustment settings - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ColorAdjustmentSaturation
Saturation adjustment value to be applied to the currently selected color channel - Applies to: CameraLink, GigE and ace USB.
Pylon::IIntegerEx & ColorAdjustmentSaturationRaw
Saturation adjustment value to be applied to the currently selected color channel (raw value) - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< ColorAdjustmentSelectorEnums > & ColorAdjustmentSelector
Sets which color in your images will be adjusted - Applies to: CameraLink, GigE and ace USB.
Pylon::IFloatEx & ColorTransformationMatrixFactor
Extent to which the color matrix influences the color values - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & ColorTransformationMatrixFactorRaw
Extent to which the color matrix influences the color values (raw value) - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & ColorTransformationValueRaw
Transformation value for the selected element in the color transformation matrix (raw value) - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< LightSourceSelectorEnums > & LightSourceSelector
Sets the type of light source for which color transformation will be performed - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< BalanceRatioSelectorEnums > & BalanceRatioSelector
Sets which color channel can be adjusted when performing manual white balance - Applies to: CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IEnumParameterT< BalanceWhiteAutoEnums > & BalanceWhiteAuto
Sets the operation mode of the Balance White Auto auto function - Applies to: CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IEnumParameterT< BandwidthReserveModeEnums > & BandwidthReserveMode
Sets a predefined bandwidth reserve or enables manual configuration of the bandwidth reserve - Applies to: ace 2 GigE.
Pylon::IBooleanEx & GevCurrentIPConfigurationDHCP
Controls whether the DHCP IP configuration scheme is activated on the given logical link - Applies to: Stereo ace and blaze.
Pylon::IBooleanEx & GevCurrentIPConfigurationLLA
Controls whether the Link Local Address IP configuration scheme is activated on the given logical link - Applies to: Stereo ace and blaze.
Pylon::IBooleanEx & GevCurrentIPConfigurationPersistentIP
Controls whether the PersistentIP configuration scheme is activated on the given logical link - Applies to: Stereo ace and blaze.
Pylon::IIntegerEx & BinningHorizontal
Number of adjacent horizontal pixels to be summed - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BinningHorizontalModeEnums > & BinningHorizontalMode
Sets the binning mode for horizontal binning - Applies to: CamEmu, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & BinningVertical
Number of adjacent vertical pixels to be summed - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BinningVerticalModeEnums > & BinningVerticalMode
Sets the binning mode for vertical binning - Applies to: CamEmu, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB, pulse USB and racer 2 CXP.
Pylon::IBooleanEx & CenterX
Centers the image horizontally - Applies to: CameraLink, GigE and ace USB.
Pylon::IBooleanEx & CenterY
Centers the image vertically - Applies to: CameraLink, GigE and ace USB.
Pylon::IIntegerEx & DecimationHorizontal
Horizontal decimation factor - Applies to: CameraLink, GigE, Stereo ace and ace USB.
Pylon::IIntegerEx & DecimationVertical
Vertical decimation factor - Applies to: CameraLink, GigE, Stereo ace, ace USB and boost V CoaXPress.
Pylon::IIntegerEx & Height
Height of the camera's region of interest (area of interest) in pixels - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & OffsetX
Horizontal offset of the region of interest (area of interest) from the left side of the sensor (in pixels) - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & OffsetY
Vertical offset of the region of interest (area of interest) from the top of the sensor (in pixels) - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< ROIZoneModeEnums > & ROIZoneMode
Enables or disables the currently selected ROI zone - Applies to: GigE and ace USB.
Pylon::IIntegerEx & ROIZoneOffset
Vertical offset of the currently selected ROI zone - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< ROIZoneSelectorEnums > & ROIZoneSelector
Sets the ROI zone that can be configured - Applies to: GigE and ace USB.
Pylon::IIntegerEx & ROIZoneSize
Height of the currently selected ROI zone - Applies to: GigE and ace USB.
Pylon::IIntegerEx & Width
Width of the camera's region of interest (area of interest) in pixels - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BinningModeHorizontalEnums > & BinningModeHorizontal
Sets the binning mode for horizontal binning - Applies to: CameraLink.
Pylon::IEnumParameterT< BinningModeVerticalEnums > & BinningModeVertical
Sets the binning mode for vertical binning - Applies to: CameraLink.
Pylon::IEnumParameterT< LegacyBinningVerticalEnums > & LegacyBinningVertical
Sets whether vertical binning is used - Applies to: CameraLink and GigE.
Pylon::IFloatEx & ScalingHorizontalAbs
Horizontal scaling factor - Applies to: GigE.
Pylon::IFloatEx & ScalingVerticalAbs
Vertical scaling factor - Applies to: GigE.
Pylon::IEnumParameterT< BinningSelectorEnums > & BinningSelector
Sets whether sensor or FPGA binning can be configured - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslCenterX
Centers the image horizontally - Applies to: CamEmu, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslCenterY
Centers the image vertically - Applies to: CamEmu, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslImageStampEnums > & BslImageStamp
Enables image stamping - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslScaledSensorHeight
Scaled Height of the camera's sensor in pixels - Applies to: dart MIPI.
Pylon::IIntegerEx & BslScaledSensorWidth
Scaled Width of the camera's sensor in pixels - Applies to: dart MIPI.
Pylon::IBooleanEx & ComponentEnable
Controls if the selected component streaming is active - Applies to: Stereo ace and blaze.
Pylon::IIntegerEx & ComponentIDValue
Returns a unique Identifier value that correspond to the selected Component type - Applies to: Stereo ace.
Pylon::IEnumParameterT< ComponentSelectorEnums > & ComponentSelector
Selects a component to activate/deactivate its data streaming - Applies to: Stereo ace and blaze.
Pylon::IIntegerEx & DepthMax
End of the three-dimensional ROI - Applies to: blaze.
Pylon::IIntegerEx & DepthMin
Start of the three-dimensional ROI - Applies to: blaze.
Pylon::IEnumParameterT< ImageFileModeEnums > & ImageFileMode
Enables loading files from disk for image acquisition - Applies to: CamEmu.
Pylon::IStringEx & ImageFilename
Enter the name of an image filename or a path to a directory containing image files - Applies to: CamEmu.
Pylon::IIntegerEx & LinePitch
Number of bytes separating the starting pixels of two consecutive lines - Applies to: ace USB.
Pylon::IBooleanEx & LinePitchEnable
Enables the alignment of output image data to multiples of 4 bytes - Applies to: ace USB.
Pylon::IFloatEx & ScalingHorizontal
Horizontal scaling factor - Applies to: ace USB.
Pylon::IFloatEx & ScalingVertical
Vertical scaling factor - Applies to: ace USB.
Pylon::IFloatEx & SensorPixelHeight
Physical size (pitch) in the y direction of a photo sensitive pixel unit - Applies to: blaze.
Pylon::IFloatEx & SensorPixelWidth
Physical size (pitch) in the x direction of a photo sensitive pixel unit - Applies to: blaze.
Pylon::IFloatEx & SensorPosition
Distance between the sensor plane and the front of the housing - Applies to: blaze.
Pylon::IEnumParameterT< TestPatternEnums > & TestPattern
Sets the test pattern to display - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & WorkingRangeMax
Maximum working range of the camera - Applies to: blaze.
Pylon::IIntegerEx & WorkingRangeMin
Minimum working range of the camera - Applies to: blaze.
Pylon::IFloatEx & BlackLevel
Black level value to be applied to the currently selected sensor tap - Applies to: CamEmu, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BslBlackLevelCompensationModeEnums > & BslBlackLevelCompensationMode
Configures black level compensation - Applies to: boost CoaXPress and dart USB.
Pylon::IEnumParameterT< BslColorSpaceModeEnums > & BslColorSpaceMode
Sets the color space for image acquisitions - Applies to: dart USB and pulse USB.
Pylon::IFloatEx & Gain
Value of the currently selected gain in dB - Applies to: CamEmu, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IFloatEx & BlackLevelAbs
Sets the value of the selected black level control as a float - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & BlackLevelRaw
Black level value to be applied to the currently selected sensor tap (raw value) - Applies to: CameraLink and GigE.
Pylon::IFloatEx & GainAbs
This is a float value that sets the selected gain control in dB - Applies to: CameraLink and GigE.
Pylon::IBooleanEx & GammaEnable
Enables gamma correction - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< GammaSelectorEnums > & GammaSelector
Sets the type of gamma to be applied - Applies to: CameraLink and GigE.
Pylon::IIntegerEx & SubstrateVoltage
Substrate voltage - Applies to: CameraLink and GigE.
Pylon::IEnumParameterT< BlackLevelSelectorEnums > & BlackLevelSelector
Sets the type of black level adjustment to be configured - Applies to: CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DigitalShift
Digital shift to be applied - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< GainAutoEnums > & GainAuto
Sets the operation mode of the Gain Auto auto function - Applies to: CamEmu, CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and pulse USB.
Pylon::IIntegerEx & GainRaw
Value of the currently selected gain (raw value) - Applies to: CamEmu, CameraLink and GigE.
Pylon::IEnumParameterT< GainSelectorEnums > & GainSelector
Sets the gain type to be adjusted - Applies to: CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart USB, pulse USB and racer 2 CXP.
Pylon::IFloatEx & Gamma
Gamma correction to be applied - Applies to: CamEmu, CameraLink, GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BslAdaptiveToneMappingModeEnums > & BslAdaptiveToneMappingMode
Configures adaptive tone mapping - Applies to: dart MIPI.
Pylon::IEnumParameterT< BslDefectPixelCorrectionModeEnums > & BslDefectPixelCorrectionMode
Identifies outlier pixels and adjusts their intensity value - Applies to: dart 2 USB, dart MIPI and dart USB.
Pylon::IEnumParameterT< BslDemosaicingMethodEnums > & BslDemosaicingMethod
Sets the demosaicing method - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress and dart USB.
Pylon::IEnumParameterT< BslDemosaicingModeEnums > & BslDemosaicingMode
Sets the demosaicing mode - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress and dart USB.
Pylon::IEnumParameterT< BslFlareRemovalAutoEnums > & BslFlareRemovalAuto
Sets FLARE control to continuous or off - Applies to: dart MIPI.
Pylon::IIntegerEx & BslLightSourceColorTemperature
Current light source color temperature - Applies to: dart MIPI.
Pylon::IEnumParameterT< BslLightSourcePresetEnums > & BslLightSourcePreset
Sets the light source preset - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI and dart USB.
Pylon::IBooleanEx & BslLightSourcePresetFeatureEnable
Enables adjustment of the selected feature - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB and dart USB.
Pylon::IEnumParameterT< BslLightSourcePresetFeatureSelectorEnums > & BslLightSourcePresetFeatureSelector
Sets which features the camera adjusts when you select a light source preset - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB and dart USB.
Pylon::IBooleanEx & BslScalingEnable
Enables scaling from sensor size to output image size - Applies to: dart MIPI.
Pylon::IFloatEx & BslScalingFactor
Scaling factor to be applied to all images - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB, dart MIPI and dart USB.
Pylon::IFloatEx & BslBrightness
Brightness value to be applied - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IFloatEx & BslContrast
Contrast value to be applied - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IEnumParameterT< BslContrastModeEnums > & BslContrastMode
Sets the contrast mode - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IFloatEx & BslHue
Hue shift value to be applied - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB and dart USB.
Pylon::IFloatEx & BslSaturation
Saturation value to be applied - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart MIPI and dart USB.
Pylon::IIntegerEx & BslBrightnessRaw
Brightness value to be applied (raw value) - Applies to: GigE.
Pylon::IIntegerEx & BslContrastRaw
Contrast value to be applied (raw value) - Applies to: GigE.
Pylon::IIntegerEx & BslHueRaw
Hue shift value to be applied (raw value) - Applies to: GigE.
Pylon::IIntegerEx & BslHueValue
Hue shift value to be applied - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & BslSaturationRaw
Saturation value to be applied (raw value) - Applies to: GigE.
Pylon::IFloatEx & BslSaturationValue
Saturation value to be applied - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & ConfidenceThreshold
Confidence threshold for pixels - Applies to: blaze.
Pylon::IEnumParameterT< DefectPixelCorrectionModeEnums > & DefectPixelCorrectionMode
Identifies outlier pixels and adjusts their intensity value - Applies to: dart USB and pulse USB.
Pylon::IBooleanEx & FilterSpatial
Enables the spatial noise filter - Applies to: blaze.
Pylon::IIntegerEx & FilterStrength
Strength of the temporal filter - Applies to: blaze.
Pylon::IBooleanEx & FilterTemporal
Enables the temporal noise filter - Applies to: blaze.
Pylon::IBooleanEx & GammaCorrection
Enables gamma correction on the intensity image - Applies to: blaze.
Pylon::IEnumParameterT< IntensityCalculationEnums > & IntensityCalculation
Sets the method for calculating the intensity data - Applies to: blaze.
Pylon::IEnumParameterT< LightSourcePresetEnums > & LightSourcePreset
Sets the light source preset - Applies to: ace USB, dart USB and pulse USB.
Pylon::IBooleanEx & OutlierRemoval
Enables the outlier removal - Applies to: blaze.
Pylon::IBooleanEx & ThermalDriftCorrection
Enables the thermal drift correction - Applies to: blaze.
Pylon::IEnumParameterT< BslChunkAutoBrightnessStatusEnums > & BslChunkAutoBrightnessStatus
Indicates the status of the target brightness adjustments performed by the Exposure Auto and Gain Auto auto functions - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< BslChunkTimestampSelectorEnums > & BslChunkTimestampSelector
Sets which information should be included in the Chunk Timestamp Value chunk - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & BslChunkTimestampValue
Value of the timestamp when the image was acquired - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< ChunkCounterSelectorEnums > & ChunkCounterSelector
Sets which counter to retrieve chunk data from - Applies to: ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & ChunkCounterValue
Value of the selected chunk counter - Applies to: ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & ChunkDynamicRangeMax
Maximum possible pixel value in the acquired image - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & ChunkDynamicRangeMin
Minimum possible pixel value in the acquired image - Applies to: GigE and ace 2 GigE.
Pylon::IFloatEx & ChunkExposureTime
Exposure time used to acquire the image - Applies to: GigE, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< ChunkExposureTimeSelectorEnums > & ChunkExposureTimeSelector
Sets which exposure time to retrieve chunk data from - Applies to: ace 2 GigE, ace 2 USB and dart USB.
Pylon::IIntegerEx & ChunkFrameID
Unique identifier of the current frame - Applies to: Stereo ace, ace 2 GigE, ace 2 USB, dart 2 USB and dart USB.
Pylon::IFloatEx & ChunkGain
Gain used during image acquisition - Applies to: Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< ChunkGainSelectorEnums > & ChunkGainSelector
Sets which gain channel to retrieve chunk data from - Applies to: ace 2 GigE, ace 2 USB, ace USB and dart USB.
Pylon::IIntegerEx & ChunkHeight
AOI height of the acquired image - Applies to: GigE, Stereo ace and ace 2 GigE.
Pylon::IIntegerEx & ChunkLineStatusAll
Bit field that indicates the status of all of the camera's input and output lines when the image was acquired - Applies to: GigE, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & ChunkOffsetX
X offset of the AOI of the acquired image - Applies to: GigE, Stereo ace and ace 2 GigE.
Pylon::IIntegerEx & ChunkOffsetY
Y offset of the AOI of the acquired image - Applies to: GigE, Stereo ace and ace 2 GigE.
Pylon::IIntegerEx & ChunkPayloadCRC16
CRC checksum of the acquired image - Applies to: GigE, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & ChunkPixelDynamicRangeMax
Maximum possible pixel value in the acquired image - Applies to: ace 2 GigE.
Pylon::IIntegerEx & ChunkPixelDynamicRangeMin
Minimum possible pixel value in the acquired image - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< ChunkPixelFormatEnums > & ChunkPixelFormat
Indicates the pixel format of the acquired image - Applies to: GigE, Stereo ace and ace 2 GigE.
Pylon::IIntegerEx & ChunkSequencerSetActive
Index of the active sequencer set - Applies to: ace 2 GigE, ace 2 USB and ace USB.
Pylon::IIntegerEx & ChunkStride
Number of bytes of data between the beginning of one line in the acquired image and the beginning of the next line in the acquired image - Applies to: GigE and ace 2 GigE.
Pylon::IIntegerEx & ChunkTimestamp
Value of the timestamp when the image was acquired - Applies to: GigE, Stereo ace and ace USB.
Pylon::IIntegerEx & ChunkWidth
Width of the AOI of the acquired image - Applies to: GigE, Stereo ace and ace 2 GigE.
Pylon::IBooleanEx & BslColorAdjustmentEnable
Enables color adjustment - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslColorAdjustmentHue
Hue adjustment value to be applied to the currently selected color channel - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslColorAdjustmentSaturation
Saturation adjustment value to be applied to the currently selected color channel - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslColorAdjustmentSelectorEnums > & BslColorAdjustmentSelector
Sets which color in your images will be adjusted - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslColorSpaceEnums > & BslColorSpace
Sets the color space for image acquisitions - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI and dart USB.
Pylon::IBooleanEx & BslDepthDoubleShot
Enables combination of disaprity images from two stereo pairs - Applies to: Stereo ace.
Pylon::IFloatEx & BslDepthExposureAdaptTimeout
Maximum time to wait after triggering until auto exposure has finished adjustments - Applies to: Stereo ace.
Pylon::IIntegerEx & BslDepthFill
Higher numbers fill gaps with measurements with potentially higher errors - Applies to: Stereo ace.
Pylon::IFloatEx & BslDepthMaxDepth
Maximum depth in meter All disparities with higher depth will be set to invalid - Applies to: Stereo ace.
Pylon::IFloatEx & BslDepthMaxDepthErr
Maximum depth error in meter All disparities with a higher depth error will be set to invalid - Applies to: Stereo ace.
Pylon::IFloatEx & BslDepthMinConf
Minimal confidence All disparities with lower confidence will be set to invalid - Applies to: Stereo ace.
Pylon::IFloatEx & BslDepthMinDepth
Minimum depth in meter All disparities with lower depth will be set to invalid - Applies to: Stereo ace.
Pylon::IEnumParameterT< BslDepthQualityEnums > & BslDepthQuality
Depth image quality (resolution) - Applies to: Stereo ace.
Pylon::IIntegerEx & BslDepthSeg
Maximum size of isolated disparity regions that will be invalidated, related to full resolution - Applies to: Stereo ace.
Pylon::IBooleanEx & BslDepthSmooth
Enables smoothing of the disparity image - Applies to: Stereo ace.
Pylon::IBooleanEx & BslDepthStaticScene
Enables accumulation of multiple images for noise reduction in static scenes - Applies to: Stereo ace.
Pylon::IIntegerEx & BslDeviceLinkCurrentThroughput
Actual bandwidth the camera will use - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IStringEx & BslImagePipelineVersion
Version of the camera's image pipeline - Applies to: dart MIPI.
Pylon::IBooleanEx & BslSystemReady
Returns if the system is ready (fully booted) - Applies to: Stereo ace.
Pylon::IFloatEx & BslTemperatureMax
Indicates the maximum temperature the camera reached during operation - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslTemperatureStatusEnums > & BslTemperatureStatus
Indicates the temperature state - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IIntegerEx & BslTemperatureStatusErrorCount
Indicates how often the temperature state changed to Error - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IStringEx & BslV4lDevicePath
Path of the Video4Linux device used to control the camera - Applies to: dart MIPI.
Pylon::IEnumParameterT< DeviceCharacterSetEnums > & DeviceCharacterSet
Indicates the character set used by the strings of the device's bootstrap registers - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceEventChannelCount
Indicates the number of event channels supported by the device - Applies to: Stereo ace and blaze.
Pylon::IStringEx & DeviceFamilyName
Identifier of the product family of the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::ICommandEx & DeviceFeaturePersistenceEnd
Disables feature streaming on the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::ICommandEx & DeviceFeaturePersistenceStart
Enables feature streaming on the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceGenCPVersionMajor
Major version of the GenCP protocol supported by the device - Applies to: ace 2 USB, dart 2 USB, dart MIPI and dart USB.
Pylon::IIntegerEx & DeviceGenCPVersionMinor
Minor version of the GenCP protocol supported by the device - Applies to: ace 2 USB, dart 2 USB, dart MIPI and dart USB.
Pylon::IEnumParameterT< DeviceIndicatorModeEnums > & DeviceIndicatorMode
Sets the behavior of the camera's status LED - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceLinkConnectionCount
Returns the number of physical connection of the device used by a particular Link - Applies to: Stereo ace and blaze.
Pylon::IIntegerEx & DeviceLinkCurrentThroughput
Actual bandwidth the camera will use - Applies to: ace USB.
Pylon::IIntegerEx & DeviceLinkSelector
Device link to be configured - Applies to: Stereo ace, ace USB, blaze, dart USB and pulse USB.
Pylon::IIntegerEx & DeviceLinkSpeed
Speed of transmission negotiated on the selected link - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, boost CoaXPress, dart 2 USB, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceLinkThroughputLimit
Bandwidth limit for data transmission (in bytes per second) - Applies to: CamEmu, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB, dart USB and pulse USB.
Pylon::IEnumParameterT< DeviceLinkThroughputLimitModeEnums > & DeviceLinkThroughputLimitMode
Enables/disables the device link throughput limit - Applies to: CamEmu, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB, dart USB and pulse USB.
Pylon::IStringEx & DeviceManifestPrimaryURL
First URL to the GenICam XML device description file of the selected manifest entry - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, boost CoaXPress and racer 2 CXP.
Pylon::IIntegerEx & DeviceManifestSchemaMajorVersion
Major version number of the schema file of the selected manifest entry - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceManifestSchemaMinorVersion
Minor version number of the schema file of the selected manifest entry - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceManifestSchemaSubMinorVersion
Subminor version number of the schema file of the selected manifest entry - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & DeviceManifestXMLMajorVersion
Major version number of the GenICam XML file of the selected manifest entry - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceManifestXMLMinorVersion
Minor version number of the GenICam XML file of the selected manifest entry - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceManifestXMLSubMinorVersion
Subminor version number of the GenICam XML file of the selected manifest entry - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< DeviceRegistersEndiannessEnums > & DeviceRegistersEndianness
Endianness of the registers of the device - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::ICommandEx & DeviceRegistersStreamingEnd
Announces the end of feature streaming - Applies to: CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::ICommandEx & DeviceRegistersStreamingStart
Prepares the camera for feature streaming - Applies to: CameraLink, GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceSFNCVersionMajor
Major version number of the SFNC specification that the camera is compatible with - Applies to: GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceSFNCVersionMinor
Minor version number of the SFNC specification that the camera is compatible with - Applies to: GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceSFNCVersionSubMinor
Subminor version number of the SFNC specification that the camera is compatible with - Applies to: GigE, Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IStringEx & DeviceSerialNumber
Serial number of the camera - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB, pulse USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceStreamChannelCount
Indicates the number of streaming channels supported by the device - Applies to: Stereo ace and blaze.
Pylon::IEnumParameterT< DeviceTLTypeEnums > & DeviceTLType
Indicates the type of the device's transport layer - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceTLVersionMajor
Major version number of the device's transport layer - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceTLVersionMinor
Minor version number of the device's transport layer - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IIntegerEx & DeviceTLVersionSubMinor
Subminor version number of the device's transport layer - Applies to: Stereo ace, ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart MIPI, dart USB and racer 2 CXP.
Pylon::IFloatEx & DeviceTemperature
Temperature at the selected location in the camera (in degrees centigrade) - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< DeviceTemperatureSelectorEnums > & DeviceTemperatureSelector
Sets the location in the camera where the temperature will be measured - Applies to: CamEmu, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB, blaze, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< DeviceTypeEnums > & DeviceType
Returns the device type - Applies to: Stereo ace and blaze.
Pylon::ICommandEx & TimestampLatch
Latches the current timestamp counter and stores its value in TimestampLatchValue - Applies to: Stereo ace, ace 2 GigE, ace 2 USB, ace USB, blaze, dart 2 USB and dart USB.
Pylon::IIntegerEx & TimestampLatchValue
Latched value of the timestamp counter - Applies to: Stereo ace, ace 2 GigE, ace 2 USB, ace USB, blaze, dart 2 USB and dart USB.
Pylon::ICommandEx & TimestampReset
Resets the current timestamp counter - Applies to: ace 2 GigE.
Pylon::IIntegerEx & BslDualROIImageValid
Indicates whether the outgoing image is valid - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslDualROIRowOffset
Vertical offset of the currently selected row - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslDualROIRowSelectorEnums > & BslDualROIRowSelector
Sets which row can be configured - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslDualROIRowSize
Height of the currently selected row - Applies to: boost V CoaXPress.
Pylon::IBooleanEx & BslDualROIRowsEnable
Enables the Dual ROI feature - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslEnableFanEnums > & BslEnableFan
Enables the external fan if one is connected - Applies to: boost V CoaXPress.
Pylon::IFloatEx & BslInputFilterTime
Time period in which the camera evaluates all changes and durations of logical states of the input signal - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IFloatEx & BslInputHoldOffTime
Time period in which the camera doesn't accept any further trigger signals or signal changes after receiving an input trigger signal - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, boost V CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IEnumParameterT< BslLineConnectionEnums > & BslLineConnection
Sets the connection signal for the currently selected line - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB and dart USB.
Pylon::IBooleanEx & BslLineOverloadStatus
Indicates whether a GPIO line is overloaded, i e , not powered correctly - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslLineRatio
Exposure time ratio for turning on the corresponding output line - Applies to: Stereo ace.
Pylon::IBooleanEx & BslLineTermination
Enables the termination resistor of the selected input or output line - Applies to: boost CoaXPress and racer 2 CXP.
Pylon::IFloatEx & LineDebouncerTime
Line debouncer time in microseconds - Applies to: ace USB and dart USB.
Pylon::IFloatEx & LineMinimumOutputPulseWidth
Minimum signal width of an output signal (in microseconds) - Applies to: ace USB.
Pylon::ICommandEx & LineOverloadReset
Resets the overload status of the selected line - Applies to: ace USB.
Pylon::IBooleanEx & LineOverloadStatus
Indicates whether an overload condition has been detected on the selected line - Applies to: ace USB.
Pylon::IBooleanEx & BslErrorPresent
Indicates whether an internal error occurred on the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::ICommandEx & BslErrorReportNext
Retrieves the next error code from the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IIntegerEx & BslErrorReportValue
Error code indicating the cause of the internal error - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress, dart 2 USB, dart USB and racer 2 CXP.
Pylon::IIntegerEx & BslFlatFieldCorrectionCoeffDSNU
Dark Signal Non-Uniformity (DSNU) coefficient of the column specified by the Flat-Field Correction Coeff X parameter - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslFlatFieldCorrectionCoeffPRNU
Photo Response Non-Uniformity (PRNU) coefficient of the column specified by the Flat-Field Correction Coeff X parameter - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslFlatFieldCorrectionCoeffX
Column used for flat-field correction - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslFlatFieldCorrectionDMean
The mean gray value of all pixels in the dark field image - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslFlatFieldCorrectionModeEnums > & BslFlatFieldCorrectionMode
Sets the flat-field correction mode - Applies to: boost V CoaXPress.
Pylon::ICommandEx & BslFlatFieldCorrectionSaveToFlash
Saves current flat-field correction values to flash memory - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslFlatFieldCorrectionUserGD
User-defined global dark offset used for flat-field correction - Applies to: boost V CoaXPress.
Pylon::IFloatEx & BslFocalLengthFactor
Focal length factor - Applies to: Stereo ace.
Pylon::IBooleanEx & FastMode
Enables the fast mode - Applies to: blaze.
Pylon::IIntegerEx & MultiCameraChannel
Operating channel of the camera - Applies to: blaze.
Pylon::IEnumParameterT< OperatingModeEnums > & OperatingMode
Sets the operating mode of the camera - Applies to: blaze.
Pylon::IFloatEx & Scan3dAxisMax
Maximum valid transmitted coordinate value of the selected Axis - Applies to: blaze.
Pylon::IFloatEx & Scan3dAxisMin
Minimum valid transmitted coordinate value of the selected Axis - Applies to: blaze.
Pylon::IFloatEx & Scan3dBaseline
Baseline of the stereo cameras - Applies to: Stereo ace.
Pylon::IFloatEx & Scan3dCalibrationOffset
Adds an offset to the measured distance - Applies to: blaze.
Pylon::IFloatEx & Scan3dCoordinateOffset
Offset when transforming a pixel from relative coordinates to world coordinates - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & Scan3dCoordinateScale
Scale factor when transforming a pixel from relative coordinates to world coordinates - Applies to: Stereo ace and blaze.
Pylon::IEnumParameterT< Scan3dCoordinateSelectorEnums > & Scan3dCoordinateSelector
Selects the individual coordinates in the vectors for 3D information/transformation - Applies to: blaze.
Pylon::IEnumParameterT< Scan3dCoordinateSystemEnums > & Scan3dCoordinateSystem
Specifies the Coordinate system to use for the device - Applies to: blaze.
Pylon::IEnumParameterT< Scan3dCoordinateSystemReferenceEnums > & Scan3dCoordinateSystemReference
Defines coordinate system reference location - Applies to: blaze.
Pylon::IEnumParameterT< Scan3dDistanceUnitEnums > & Scan3dDistanceUnit
Specifies the unit used when delivering (calibrated) distance data - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & Scan3dFocalLength
Returns the focal length of the camera in pixel - Applies to: Stereo ace and blaze.
Pylon::IBooleanEx & Scan3dInvalidDataFlag
Enables the definition of a non-valid flag value in the data stream - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & Scan3dInvalidDataValue
Value which identifies a non-valid pixel if Scan3dInvalidDataFlag is enabled - Applies to: Stereo ace and blaze.
Pylon::IEnumParameterT< Scan3dOutputModeEnums > & Scan3dOutputMode
Controls the Calibration and data organization of the device and the coordinates transmitted - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & Scan3dPrincipalPointU
Returns the value of the horizontal position of the principal point, relative to the region origin, i e - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & Scan3dPrincipalPointV
Returns the value of the vertical position of the principal point, relative to the region origin, i e - Applies to: Stereo ace and blaze.
Pylon::IFloatEx & ZOffsetOriginToCameraFront
Distance between the origin of the z axis to the front of the camera housing - Applies to: blaze.
Pylon::IIntegerEx & BslFocusAutoROIHeight
Height of focus auto ROI - Applies to: dart MIPI.
Pylon::IEnumParameterT< BslFocusAutoROIModeEnums > & BslFocusAutoROIMode
Sets the mode that determines the focus auto ROI - Applies to: dart MIPI.
Pylon::IIntegerEx & BslFocusAutoROIOffsetX
OffsetX of focus auto ROI - Applies to: dart MIPI.
Pylon::IIntegerEx & BslFocusAutoROIOffsetY
OffsetY of focus auto ROI - Applies to: dart MIPI.
Pylon::IIntegerEx & BslFocusAutoROIWidth
Width of focus auto ROI - Applies to: dart MIPI.
Pylon::IEnumParameterT< FocusAutoEnums > & FocusAuto
Sets the operation mode of the Autofocus function - Applies to: dart MIPI.
Pylon::IEnumParameterT< FocusStatusEnums > & FocusStatus
Displays the status of the focus - Applies to: dart MIPI.
Pylon::IIntegerEx & FocusStepper
Stepper value of the focus lens actuator - Applies to: dart MIPI.
Pylon::IEnumParameterT< OpticControllerSelectorEnums > & OpticControllerSelector
Select which optic controller to configure - Applies to: dart MIPI.
Pylon::IEnumParameterT< BslFrequencyConverterActivationEnums > & BslFrequencyConverterActivation
Sets the type of signal transition that will drive the frequency converter - Applies to: racer 2 CXP.
Pylon::IIntegerEx & BslFrequencyConverterMultiplier
Multiplier value to increase the signal frequency - Applies to: racer 2 CXP.
Pylon::IIntegerEx & BslFrequencyConverterPostDivider
Post-divider value to decrease the signal frequency - Applies to: racer 2 CXP.
Pylon::IIntegerEx & BslFrequencyConverterPreDivider
Pre-divider value to decrease the signal frequency - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslFrequencyConverterSignalSourceEnums > & BslFrequencyConverterSignalSource
Sets the source signal for the frequency converter - Applies to: racer 2 CXP.
Pylon::IFloatEx & BslImageCompressionLastRatio
Ratio between the compressed payload size and the uncompressed payload size of the last acquired image - Applies to: ace 2 GigE and ace 2 USB.
Pylon::IIntegerEx & BslImageCompressionLastSize
Compressed payload size of the last acquired image in bytes - Applies to: ace 2 GigE and ace 2 USB.
Pylon::IFloatEx & BslImageCompressionRatio
Maximum ratio between the payload size of compressed and uncompressed images - Applies to: ace 2 GigE and ace 2 USB.
Pylon::IEnumParameterT< ImageCompressionModeEnums > & ImageCompressionMode
Sets the compression mode of the camera - Applies to: ace 2 GigE and ace 2 USB.
Pylon::IEnumParameterT< ImageCompressionRateOptionEnums > & ImageCompressionRateOption
Configures the selected compression mechanism - Applies to: ace 2 GigE and ace 2 USB.
Pylon::ICommandEx & BslLightControlEnumerateDevices
Searches for light devices connected to your camera - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightControlErrorStatusEnums > & BslLightControlErrorStatus
Indicates whether any of the light devices are currently experiencing problems - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BslLightControlErrorSummaryEnums > & BslLightControlErrorSummary
Indicates whether any of the light devices are currently experiencing problems - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightControlModeEnums > & BslLightControlMode
Enables or disables the light control features - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IIntegerEx & BslLightControlOvertriggerCount
Number of trigger signals that were received while any of the connected light devices wasn't ready for it - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::ICommandEx & BslLightControlOvertriggerCountReset
Resets the counter for trigger signals that were received while any of the connected light devices wasn't ready for it - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightControlSourceEnums > & BslLightControlSource
Sets which line is used to control the light features - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BslLightControlStatusEnums > & BslLightControlStatus
Indicates the current state of the light control mode - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BslLightControlTriggerActivationEnums > & BslLightControlTriggerActivation
Sets the type of signal transition that will trigger connected light devices - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightControlTriggerSourceEnums > & BslLightControlTriggerSource
Sets which signal is used to trigger connected light devices - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslLightDeviceBrightness
Brightness of the light in percent of total brightness available - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IIntegerEx & BslLightDeviceBrightnessRaw
Brightness of the light in percent of total brightness available (raw value) - Applies to: GigE.
Pylon::IEnumParameterT< BslLightDeviceChangeIDEnums > & BslLightDeviceChangeID
Changes the ID of the currently selected light device - Applies to: GigE and ace USB.
Pylon::ICommandEx & BslLightDeviceClearLastError
Clears the last light device error - Applies to: GigE and ace USB.
Pylon::IEnumParameterT< BslLightDeviceControlModeEnums > & BslLightDeviceControlMode
Sets how the light device is controlled - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslLightDeviceCurrent
Nominal current that the light device uses in continuous operation - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslLightDeviceDutyCycle
Duty cycle of the device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IIntegerEx & BslLightDeviceErrorCode
Error code indicating the cause of an error in a light device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightDeviceErrorStatusEnums > & BslLightDeviceErrorStatus
Error status indicating whether the current light device is experiencing problems - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::ICommandEx & BslLightDeviceErrorStatusReadAndClear
Reads the error code from the current light device and resets the error status to No Error - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IStringEx & BslLightDeviceFirmwareVersion
Version of the light device's firmware - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightDeviceLastErrorEnums > & BslLightDeviceLastError
Indicates the last light device error - Applies to: GigE and ace USB.
Pylon::IFloatEx & BslLightDeviceMaxCurrent
Maximum current that the light device is going to use - Applies to: GigE and ace USB.
Pylon::IIntegerEx & BslLightDeviceMaxCurrentRaw
Maximum current that the light device is going to use (raw value) - Applies to: GigE.
Pylon::IStringEx & BslLightDeviceModelName
Name of the light device model - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightDeviceNewIDEnums > & BslLightDeviceNewID
Sets which ID should be assigned to the current light device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::ICommandEx & BslLightDeviceNewIDSave
Changes the ID of the current light device - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightDeviceOperationModeEnums > & BslLightDeviceOperationMode
Sets the operation mode of the light device - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IFloatEx & BslLightDeviceOverdriveLimit
Maximum current to be used when operating the light device in overdrive - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslLightDeviceSelectorEnums > & BslLightDeviceSelector
Sets which light device can be configured - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IFloatEx & BslLightDeviceStrobeDuration
Duration of the individual strobe pulses - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IIntegerEx & BslLightDeviceStrobeDurationRaw
Duration of the individual strobe pulses (raw value) - Applies to: GigE.
Pylon::IEnumParameterT< BslLightDeviceStrobeModeEnums > & BslLightDeviceStrobeMode
Sets the strobe mode of the light device - Applies to: GigE, ace 2 CXP, ace 2 GigE, ace 2 USB, ace USB and boost CoaXPress.
Pylon::IIntegerEx & BslMultipleROIColumnOffset
Horizontal offset of the currently selected column - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslMultipleROIColumnSelectorEnums > & BslMultipleROIColumnSelector
Sets which column can be configured - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IIntegerEx & BslMultipleROIColumnSize
Width of the currently selected column - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IBooleanEx & BslMultipleROIColumnsEnable
Enables or disables the ability to define multiple regions in horizontal direction - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IIntegerEx & BslMultipleROIRowOffset
Vertical offset of the currently selected row - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslMultipleROIRowSelectorEnums > & BslMultipleROIRowSelector
Sets which row can be configured - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IIntegerEx & BslMultipleROIRowSize
Height of the currently selected row - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IBooleanEx & BslMultipleROIRowsEnable
Enables or disables the ability to define multiple regions in vertical direction - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IFloatEx & BslNoiseReduction
Amount of noise reduction to be applied - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< BslPeriodicSignalActivationEnums > & BslPeriodicSignalActivation
Sets the transition type of the source signal that activates the synchronization - Applies to: dart MIPI.
Pylon::IFloatEx & BslPeriodicSignalDelay
Delay to be applied to the periodic signal in microseconds - Applies to: ace 2 GigE and dart MIPI.
Pylon::IFloatEx & BslPeriodicSignalPeriod
Length of the periodic signal in microseconds - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< BslPeriodicSignalSelectorEnums > & BslPeriodicSignalSelector
Sets the periodic signal channel to be configured - Applies to: ace 2 GigE and dart MIPI.
Pylon::IEnumParameterT< BslPeriodicSignalSourceEnums > & BslPeriodicSignalSource
Sets the source for synchronizing the periodic signal - Applies to: ace 2 GigE and dart MIPI.
Pylon::IEnumParameterT< BslPtpDelayMechanismEnums > & BslPtpDelayMechanism
Indicates the PTP delay mechanism - Applies to: ace 2 GigE.
Pylon::IBooleanEx & BslPtpManagementEnable
Enables PTP management - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< BslPtpNetworkModeEnums > & BslPtpNetworkMode
Sets the mode for PTP network communication - Applies to: ace 2 GigE.
Pylon::IIntegerEx & BslPtpPriority1
Value indicating the priority of the device when determining the master clock - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< BslPtpProfileEnums > & BslPtpProfile
Sets the default PTP profile - Applies to: ace 2 GigE.
Pylon::IIntegerEx & BslPtpServoLockedThreshold
Threshold value below which the device will set the Ptp Servo Status parameter to Locked, indicating that the device is sufficiently synchronized - Applies to: ace 2 GigE.
Pylon::IBooleanEx & BslPtpTwoStep
Configures a two-step clock if enabled or a one-step clock if disabled - Applies to: ace 2 GigE.
Pylon::IIntegerEx & BslPtpUcPortAddr
Unicast port address - Applies to: ace 2 GigE.
Pylon::IIntegerEx & BslPtpUcPortAddrIndex
Unicast port address index - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< PtpClockAccuracyEnums > & PtpClockAccuracy
Indicates the expected accuracy of the PTP device clock when it is or becomes the grandmaster - Applies to: ace 2 GigE.
Pylon::IIntegerEx & PtpClockID
Returns the latched clock ID of the PTP device - Applies to: ace 2 GigE.
Pylon::ICommandEx & PtpDataSetLatch
Latches the current values from the device's PTP clock data set - Applies to: Stereo ace, ace 2 GigE and blaze.
Pylon::IBooleanEx & PtpEnable
Enables the Precision Time Protocol (PTP) - Applies to: Stereo ace, ace 2 GigE and blaze.
Pylon::IIntegerEx & PtpGrandmasterClockID
Returns the latched grandmaster clock ID of the PTP device - Applies to: ace 2 GigE.
Pylon::IIntegerEx & PtpOffsetFromMaster
Returns the latched offset from the PTP master clock in nanoseconds - Applies to: Stereo ace, ace 2 GigE and blaze.
Pylon::IIntegerEx & PtpParentClockID
Returns the latched parent clock ID of the PTP device - Applies to: ace 2 GigE.
Pylon::IEnumParameterT< PtpServoStatusEnums > & PtpServoStatus
Returns the latched state of the clock servo - Applies to: Stereo ace and ace 2 GigE.
Pylon::IEnumParameterT< PtpStatusEnums > & PtpStatus
Returns the latched state of the PTP clock - Applies to: Stereo ace, ace 2 GigE and blaze.
Pylon::IEnumParameterT< BslSerialBaudRateEnums > & BslSerialBaudRate
Sets the baud rate used in serial communication - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IEnumParameterT< BslSerialNumberOfDataBitsEnums > & BslSerialNumberOfDataBits
Sets the number of data bits used in serial communication - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IEnumParameterT< BslSerialNumberOfStopBitsEnums > & BslSerialNumberOfStopBits
Sets the number of stop bits used in serial communication - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IEnumParameterT< BslSerialParityEnums > & BslSerialParity
Sets which kind of parity check is performed - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::ICommandEx & BslSerialReceive
Initiates a receiving transaction from the serial input buffer - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialRxBreak
Indicates the incoming break signal status - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::ICommandEx & BslSerialRxBreakReset
Resets the incoming break status - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialRxFifoOverflow
Indicates the overflow status of the receiving FIFO - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialRxParityError
Indicates the parity error status of the receiving FIFO - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IEnumParameterT< BslSerialRxSourceEnums > & BslSerialRxSource
Sets the source of the Rx serial input - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialRxStopBitError
Indicates the stop bit error status of the receiving FIFO - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IRegisterEx & BslSerialTransferBuffer
Buffer that holds Rx or Tx transfer data in the controller domain - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IIntegerEx & BslSerialTransferLength
Effective number of serial frames in a Rx or Tx data transfer - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::ICommandEx & BslSerialTransmit
Initiates a transmitting transaction to the serial output buffer - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialTxBreak
Signals a break to a receiver connected to the camera, or terminates the break - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialTxFifoEmpty
Indicates whether the transmitting FIFO is empty - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IBooleanEx & BslSerialTxFifoOverflow
Indicates whether the transmitting FIFO has overflown - Applies to: ace 2 GigE, ace 2 USB, boost CoaXPress and racer 2 CXP.
Pylon::IIntegerEx & BslShadingCorrectionAbsoluteTargetValue
Absolute target value of the sensor brightness - Applies to: racer 2 CXP.
Pylon::IIntegerEx & BslShadingCorrectionMaximumMeasuredValue
Maximum brightness value detected by the camera during the creation of a PRNU shading correction set - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslShadingCorrectionModeEnums > & BslShadingCorrectionMode
Sets the shading correction mode - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslShadingCorrectionSelectorEnums > & BslShadingCorrectionSelector
Sets the shading correction type to be performed - Applies to: racer 2 CXP.
Pylon::ICommandEx & BslShadingCorrectionSetCreate
Creates a shading correction set - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslShadingCorrectionSetCreateResultEnums > & BslShadingCorrectionSetCreateResult
Indicates the result of the shading correction set creation - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslShadingCorrectionSetCreateStatusEnums > & BslShadingCorrectionSetCreateStatus
Indicates the status of the shading correction set created - Applies to: racer 2 CXP.
Pylon::IIntegerEx & BslShadingCorrectionSetIndex
Index number of the shading correction set to be created - Applies to: racer 2 CXP.
Pylon::IEnumParameterT< BslShadingCorrectionSetStatusEnums > & BslShadingCorrectionSetStatus
Returns the status of the shading correction set - Applies to: racer 2 CXP.
Pylon::IFloatEx & BslShadingCorrectionTargetValue
Relative target value of the sensor brightness you want to achieve - Applies to: racer 2 CXP.
Pylon::IFloatEx & BslSharpnessEnhancement
Sharpening value to be applied - Applies to: ace 2 GigE, ace 2 USB, dart 2 USB, dart MIPI and dart USB.
Pylon::ICommandEx & BslStaticDefectPixelCorrectionClearAll
Clears all custom defect pixel coordinates - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslStaticDefectPixelCorrectionCount
Indicates how many defect pixels are being corrected - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslStaticDefectPixelCorrectionFileStatusEnums > & BslStaticDefectPixelCorrectionFileStatus
Returns the file status of the defect pixel correction file - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IIntegerEx & BslStaticDefectPixelCorrectionMaxDefects
Maximum number of defect pixels that the factory or user correction file can contain - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::IEnumParameterT< BslStaticDefectPixelCorrectionModeEnums > & BslStaticDefectPixelCorrectionMode
Sets the static defect pixel correction mode - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB, boost CoaXPress and boost V CoaXPress.
Pylon::ICommandEx & BslStaticDefectPixelCorrectionReload
Reloads the user defect pixel correction file - Applies to: ace 2 CXP, ace 2 GigE, ace 2 USB and boost CoaXPress.
Pylon::ICommandEx & BslStaticDefectPixelCorrectionSave
Saves changes to the defect pixel coordinates to flash memory - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslStaticDefectPixelCorrectionTestModeEnums > & BslStaticDefectPixelCorrectionTestMode
Enables or disables the static defect pixel correction test mode - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslStaticDefectPixelCorrectionXCoordinate
X coordinate of the defect pixel to be corrected - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslStaticDefectPixelCorrectionXSelectorEnums > & BslStaticDefectPixelCorrectionXSelector
Sets which x coordinate entry can be configured - Applies to: boost V CoaXPress.
Pylon::IIntegerEx & BslStaticDefectPixelCorrectionYCoordinate
Y coordinate of the defect pixel to be corrected - Applies to: boost V CoaXPress.
Pylon::IEnumParameterT< BslTwiBitrateEnums > & BslTwiBitrate
Sets the bit rate for TWI communication - Applies to: dart 2 USB and dart USB.
Pylon::IBooleanEx & BslTwiPullSclLow
Pulls SCL low, which is rarely needed - Applies to: dart 2 USB and dart USB.
Pylon::IBooleanEx & BslTwiPullSdaLow
Pulls SDA low, which is rarely needed - Applies to: dart 2 USB and dart USB.
Pylon::ICommandEx & BslTwiRead
Triggers a read transfer - Applies to: dart 2 USB and dart USB.
Pylon::IIntegerEx & BslTwiTargetAddress
Address of the target device - Applies to: dart 2 USB and dart USB.
Pylon::IRegisterEx & BslTwiTransferBuffer
Buffer that holds data to be written or data that was read - Applies to: dart 2 USB and dart USB.
Pylon::IIntegerEx & BslTwiTransferLength
Number of bytes to be transferred from or to the transfer buffer - Applies to: dart 2 USB and dart USB.
Pylon::IEnumParameterT< BslTwiTransferStatusEnums > & BslTwiTransferStatus
Indicates the status of an accepted read or write transfer - Applies to: dart 2 USB and dart USB.
Pylon::ICommandEx & BslTwiUpdateTransferStatus
Triggers an update of the transfer status - Applies to: dart 2 USB and dart USB.
Pylon::ICommandEx & BslTwiWrite
Triggers a write transfer - Applies to: dart 2 USB and dart USB.
Pylon::IEnumParameterT< BslUSBPowerSourceEnums > & BslUSBPowerSource
Indicates how power is supplied to the device - Applies to: ace 2 USB and dart USB.
Pylon::IEnumParameterT< BslUSBSpeedModeEnums > & BslUSBSpeedMode
Indicates the speed mode of the USB port - Applies to: ace 2 USB, ace USB, dart 2 USB, dart USB and pulse USB.
Pylon::IEnumParameterT< DeviceTapGeometryEnums > & DeviceTapGeometry
Sets the tap geometry - Applies to: ace 2 CXP, boost CoaXPress, boost V CoaXPress and racer 2 CXP.
Pylon::ICommandEx & ForceFailedBuffer
Marks the next buffer as failed - Applies to: CamEmu.
Pylon::IIntegerEx & ForceFailedBufferCount
Number of failed buffers to generate - Applies to: CamEmu.
Pylon::IEnumParameterT< GenDCStreamingModeEnums > & GenDCStreamingMode
Controls the device's streaming format - Applies to: blaze.
Pylon::IEnumParameterT< GenDCStreamingStatusEnums > & GenDCStreamingStatus
Returns whether the current device data streaming format is GenDC - Applies to: blaze.
Pylon::IIntegerEx & PayloadFinalTransfer1Size
For information only May be required when contacting Basler support - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & PayloadFinalTransfer2Size
For information only May be required when contacting Basler support - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & PayloadTransferBlockDelay
This parameter is required when using the sequencer - Applies to: ace USB.
Pylon::IIntegerEx & PayloadTransferCount
For information only May be required when contacting Basler support - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & PayloadTransferSize
For information only May be required when contacting Basler support - Applies to: dart USB and pulse USB.
Pylon::IIntegerEx & SIPayloadFinalTransfer1Size
For information only May be required when contacting Basler support - Applies to: ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & SIPayloadFinalTransfer2Size
For information only May be required when contacting Basler support - Applies to: ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & SIPayloadTransferCount
For information only May be required when contacting Basler support - Applies to: ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & SIPayloadTransferSize
For information only May be required when contacting Basler support - Applies to: ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::ICommandEx & BslVignettingCorrectionLoad
Loads the vignetting correction data from the camera's file system - Applies to: boost CoaXPress.
Pylon::IEnumParameterT< BslVignettingCorrectionModeEnums > & BslVignettingCorrectionMode
Enables the vignetting correction - Applies to: boost CoaXPress and dart MIPI.
Pylon::IEnumParameterT< CameraOperationModeEnums > & CameraOperationMode
Sets the camera operation mode - Applies to: ace USB.
Pylon::IFloatEx & ChunkBslLineRatio
Returns the exposure ratio of the selected output line - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkBslMaxDepth
Maximum depth that was used - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkBslMinDepth
Minimum depth that was used - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkBslNoise
Returns the noise of the image - Applies to: Stereo ace.
Pylon::IBooleanEx & ChunkBslReducedDepthRange
Signals if the depth range had to be reduced due to memory limits - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkComponentIDEnums > & ChunkComponentID
Returns the component of the payload image - Applies to: Stereo ace.
Pylon::IIntegerEx & ChunkComponentIDValue
Returns a unique Identifier value that corresponds to the selected chunk component - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkComponentSelectorEnums > & ChunkComponentSelector
Selects the Component from which to retreive data from - Applies to: Stereo ace.
Pylon::IIntegerEx & ChunkComponents
Returns the bitmask of components contained in this block - Applies to: Stereo ace.
Pylon::IIntegerEx & ChunkDecimationHorizontal
Horizontal sub-sampling of the image - Applies to: Stereo ace.
Pylon::IIntegerEx & ChunkDecimationVertical
Vertical sub-sampling of the image - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkLineSelectorEnums > & ChunkLineSelector
Selects the output for which to read the LineSource - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkLineSourceEnums > & ChunkLineSource
Line source for selected line - Applies to: Stereo ace.
Pylon::IBooleanEx & ChunkLineStatus
Returns the current status of the selected input or output Line - Applies to: Stereo ace.
Pylon::IIntegerEx & ChunkPartIndex
Returns index of the image part in this block depending on selected component - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dBaseline
Baseline of the stereo cameras - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dCoordinateOffset
Returns the offset when transforming a pixel from relative coordinates to world coordinates - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dCoordinateScale
Returns the scale factor when transforming a pixel from relative coordinates to world coordinates - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkScan3dCoordinateSelectorEnums > & ChunkScan3dCoordinateSelector
Selects which Coordinate to retrieve data from - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkScan3dDistanceUnitEnums > & ChunkScan3dDistanceUnit
Returns the Distance Unit of the payload image - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dFocalLength
Focal length - Applies to: Stereo ace.
Pylon::IBooleanEx & ChunkScan3dInvalidDataFlag
Returns if a specific non-valid data flag is used in the payload image - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dInvalidDataValue
Returns the value which identifies a non-valid pixel - Applies to: Stereo ace.
Pylon::IEnumParameterT< ChunkScan3dOutputModeEnums > & ChunkScan3dOutputMode
Returns the Calibrated Mode of the payload image - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dPrincipalPointU
Horizontal position of the principal point - Applies to: Stereo ace.
Pylon::IFloatEx & ChunkScan3dPrincipalPointV
Vertical position of the principal point - Applies to: Stereo ace.
Pylon::IBooleanEx & ChunkEnable
Includes the currently selected chunk in the payload data - Applies to: GigE, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IBooleanEx & ChunkModeActive
Enables the chunk mode - Applies to: GigE, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IEnumParameterT< ChunkSelectorEnums > & ChunkSelector
Sets which chunk can be enabled - Applies to: GigE, Stereo ace, ace 2 GigE, ace 2 USB, ace USB, dart 2 USB and dart USB.
Pylon::IIntegerEx & ChunkFrameTriggerCounter
Value of the Frame Trigger counter when the image was acquired - Applies to: GigE.
Pylon::IIntegerEx & ChunkFrameTriggerIgnoredCounter
Value of the Frame Trigger Ignored counter when the image was acquired - Applies to: GigE.
Pylon::IIntegerEx & ChunkFramecounter
Value of the Frame counter when the image was acquired - Applies to: GigE.
Pylon::IIntegerEx<